Polyurethane self-leveling flooring slab in three-quarter view with a muted teal satin surface, primer and concrete base

Системы полы для чистых комнат

Полиуретанные самовыровняющиеся полы

A solvent-free, tough-elastic polyurethane wearing layer that flows smooth while accommodating limited substrate movement and repeated footfall.

Tough-Elastic Resin
Crack-Bridging Capacity
Comfortable Footfall
Smooth Low-VOC Finish

Запрос котировки Просмотреть продукты

Введение продукции

Polyurethane self-leveling flooring uses a two-component, pigmented elastic resin that flows into a smooth continuous wearing layer. Compared with rigid epoxy, the cured polyurethane provides greater elongation and can accommodate limited non-moving cracks or substrate strain when installed as part of a compatible system. Its quieter, slightly resilient feel suits healthcare, laboratory and clean circulation spaces with prolonged pedestrian use. A wear-resistant polyurethane topcoat controls sheen, color retention and cleaning response while integral coves eliminate exposed perimeter joints.

Основные характеристики

Tough-elastic behavior accommodates small substrate strains that may reflect through a rigid resin finish.

The smooth self-leveling body coat produces a continuous surface suited to frequent pedestrian cleaning routes.

Slight resilience improves underfoot comfort and reduces the sharp impact sound of carts and footsteps.

A compatible polyurethane topcoat provides the selected satin or matte appearance and additional wear protection.

Обеспокоенность клиентов продуктами

Rigid flooring can mirror minor slab movement and feel harsh in rooms dominated by pedestrian circulation rather than heavy process loads.

Minor substrate strain produces visible hairline cracks in a rigid resin finish.The tough-elastic polyurethane layer provides higher elongation and limited crack-bridging capacity.

Long clean corridors amplify trolley and footfall noise.The resilient wearing layer softens impact transmission compared with a hard mineral-rich screed.

Open sheet-floor seams become difficult to clean at room perimeters.The liquid-applied surface continues seamlessly into a compatible cove detail.

A high-gloss surface shows every scuff in a public-facing controlled area.Satin and matte polyurethane topcoats reduce glare and provide a more forgiving maintenance appearance.

Типичные приложения

Healthcare clean corridorsResearch laboratoriesMedical-device assembly spacesPharmaceutical offices and support roomsLight production and inspection areas

Технические параметры

Typical ranges for a filled, self-smoothing polyurethane floor with a protective topcoat are listed below.

Основной материал	Two-part solvent-free tough-elastic polyurethane resin with fine quartz filler
Толщина панели	1.5–3.0 mm self-leveling polyurethane system thickness
эффективная ширина	Typically 2500–4500 mm flow-applied bay width
Максимальная длина	Typically up to 16000 mm continuous run between retained movement joints
Толщина линий стали	0 mm; the seamless floor uses no steel facing
Плотность ядра	Approximately 1400–1650 kg/m³ for mixed and filled polyurethane
Теплопроводимость	Typically 0.20–0.32 W/(m·K) for the cured polyurethane layer
Поверхностная отделка	Smooth satin or matte pigmented polyurethane topcoat over the self-leveling body
Объединенный тип	Primer-bonded seamless body coat with polyurethane topcoat, coved edges and active joints carried through
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Satin, matte or low-gloss topcoatStandard or enhanced crack-bridging buildIntegral cove and contrasting wall baseDecorative color zoning and fine slip texture

Planning a Polyurethane Self-Leveling Flooring specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой