Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Cleanroom Flooring Sistem
Polyurethane Self-Leveling Flooring
A solvent-free, tough-elastic polyurethane wearing layer that flows smooth while accommodating limited substrate movement and repeated footfall.
- Tough-Elastic Resin
- Crack-Bridging Capacity
- Comfortable Footfall
- Smooth Low-VOC Finish
Perkenalan produk
Polyurethane self-leveling flooring uses a two-component, pigmented elastic resin that flows into a smooth continuous wearing layer. Compared with rigid epoxy, the cured polyurethane provides greater elongation and can accommodate limited non-moving cracks or substrate strain when installed as part of a compatible system. Its quieter, slightly resilient feel suits healthcare, laboratory and clean circulation spaces with prolonged pedestrian use. A wear-resistant polyurethane topcoat controls sheen, color retention and cleaning response while integral coves eliminate exposed perimeter joints.
Fitur utama:
The smooth self-leveling body coat produces a continuous surface suited to frequent pedestrian cleaning routes.
Slight resilience improves underfoot comfort and reduces the sharp impact sound of carts and footsteps.
A compatible polyurethane topcoat provides the selected satin or matte appearance and additional wear protection.
Kekhawatiran produk pelanggan
Rigid flooring can mirror minor slab movement and feel harsh in rooms dominated by pedestrian circulation rather than heavy process loads.
Minor substrate strain produces visible hairline cracks in a rigid resin finish.The tough-elastic polyurethane layer provides higher elongation and limited crack-bridging capacity.
Long clean corridors amplify trolley and footfall noise.The resilient wearing layer softens impact transmission compared with a hard mineral-rich screed.
Open sheet-floor seams become difficult to clean at room perimeters.The liquid-applied surface continues seamlessly into a compatible cove detail.
A high-gloss surface shows every scuff in a public-facing controlled area.Satin and matte polyurethane topcoats reduce glare and provide a more forgiving maintenance appearance.
Aplikasi yang Tipis
Healthcare clean corridorsResearch laboratoriesMedical-device assembly spacesPharmaceutical offices and support roomsLight production and inspection areas
Parameter teknis
Typical ranges for a filled, self-smoothing polyurethane floor with a protective topcoat are listed below.
| Bahan inti | Two-part solvent-free tough-elastic polyurethane resin with fine quartz filler |
|---|---|
| Ketebalan Panel (Panel Thickness) | 1.5–3.0 mm self-leveling polyurethane system thickness |
| Efektif lebar | Typically 2500–4500 mm flow-applied bay width |
| Panjang maksimum | Typically up to 16000 mm continuous run between retained movement joints |
| Baja menghadap ketebalan | 0 mm; the seamless floor uses no steel facing |
| Kepadatan inti (core density) | Approximately 1400–1650 kg/m³ for mixed and filled polyurethane |
| Konduktivitas Termal (Thermal Conductivity) | Typically 0.20–0.32 W/(m·K) for the cured polyurethane layer |
| Permukaan selesai | Smooth satin or matte pigmented polyurethane topcoat over the self-leveling body |
| Jenis Bersama | Primer-bonded seamless body coat with polyurethane topcoat, coved edges and active joints carried through |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Satin, matte or low-gloss topcoatStandard or enhanced crack-bridging buildIntegral cove and contrasting wall baseDecorative color zoning and fine slip texture
Planning a Polyurethane Self-Leveling Flooring specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
