Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom Flooring Systems
Polyuréthane sol auto-nivelant
A solvent-free, tough-elastic polyurethane wearing layer that flows smooth while accommodating limited substrate movement and repeated footfall.
- Tough-Elastic Resin
- Crack-Bridging Capacity
- Comfortable Footfall
- Smooth Low-VOC Finish
Introduction de produit
Polyurethane self-leveling flooring uses a two-component, pigmented elastic resin that flows into a smooth continuous wearing layer. Compared with rigid epoxy, the cured polyurethane provides greater elongation and can accommodate limited non-moving cracks or substrate strain when installed as part of a compatible system. Its quieter, slightly resilient feel suits healthcare, laboratory and clean circulation spaces with prolonged pedestrian use. A wear-resistant polyurethane topcoat controls sheen, color retention and cleaning response while integral coves eliminate exposed perimeter joints.
Key Features
The smooth self-leveling body coat produces a continuous surface suited to frequent pedestrian cleaning routes.
Slight resilience improves underfoot comfort and reduces the sharp impact sound of carts and footsteps.
A compatible polyurethane topcoat provides the selected satin or matte appearance and additional wear protection.
Préoccupations du client produit
Rigid flooring can mirror minor slab movement and feel harsh in rooms dominated by pedestrian circulation rather than heavy process loads.
Minor substrate strain produces visible hairline cracks in a rigid resin finish.The tough-elastic polyurethane layer provides higher elongation and limited crack-bridging capacity.
Long clean corridors amplify trolley and footfall noise.The resilient wearing layer softens impact transmission compared with a hard mineral-rich screed.
Open sheet-floor seams become difficult to clean at room perimeters.The liquid-applied surface continues seamlessly into a compatible cove detail.
A high-gloss surface shows every scuff in a public-facing controlled area.Satin and matte polyurethane topcoats reduce glare and provide a more forgiving maintenance appearance.
Les applications typiques
Healthcare clean corridorsResearch laboratoriesMedical-device assembly spacesPharmaceutical offices and support roomsLight production and inspection areas
Paramètres techniques
Typical ranges for a filled, self-smoothing polyurethane floor with a protective topcoat are listed below.
| Matériaux de base | Two-part solvent-free tough-elastic polyurethane resin with fine quartz filler |
|---|---|
| Panneau épaisseur | 1.5–3.0 mm self-leveling polyurethane system thickness |
| Largeur effective | Typically 2500–4500 mm flow-applied bay width |
| Longueur maximale | Typically up to 16000 mm continuous run between retained movement joints |
| Acier face épaisseur | 0 mm; the seamless floor uses no steel facing |
| Densité Core | Approximately 1400–1650 kg/m³ for mixed and filled polyurethane |
| Conductivité thermique | Typically 0.20–0.32 W/(m·K) for the cured polyurethane layer |
| surface finie | Smooth satin or matte pigmented polyurethane topcoat over the self-leveling body |
| Type joint | Primer-bonded seamless body coat with polyurethane topcoat, coved edges and active joints carried through |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Satin, matte or low-gloss topcoatStandard or enhanced crack-bridging buildIntegral cove and contrasting wall baseDecorative color zoning and fine slip texture
Planning a Polyurethane Self-Leveling Flooring specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
