Perforated steel airflow floor panel with black opposed-blade damper and pedestals

Системы полы для чистых комнат

Перфорированная сталь поднятый пол доступа

A removable welded steel ventilation panel with round or slotted openings that delivers controlled airflow from a pressurized raised-floor plenum.

15–38% Free Air Area
Underfloor Air Delivery
Optional Volume-Control Damper
Heavy-Duty Welded Frame

Запрос котировки Просмотреть продукты

Введение продукции

Perforated steel raised access flooring introduces supply air through selected modules in a solid access-floor field. Each panel uses a welded tubular steel frame and perforated top plate sized to remain stable under equipment and pedestrian loads. Round or slotted patterns provide several free-area ratios, allowing airflow capacity to be allocated by zone. A removable damper beneath the panel can balance air volume without changing the visible floor grid, and powder coating protects the exposed steel surfaces.

Основные характеристики

Standard round or slotted perforations provide selectable free areas from approximately 15% to 38%.

A welded steel frame carries concentrated loads around the open ventilation field.

An optional underside damper permits local balancing of airflow from the pressurized plenum.

The module fits a conventional 600 mm pedestal grid and can replace a solid panel at required supply positions.

Обеспокоенность клиентов продуктами

A raised-floor air system needs predictable open area and balancing control without sacrificing panel stability or service access.

Uniform perforation across the room over-supplies some zones and starves high-load positions.Different hole patterns and free-area ratios allocate airflow where the process or equipment requires it.

Changing fan speed alone cannot balance individual floor outlets.An underside volume-control damper adjusts flow at each selected panel.

Thin perforated sheet flexes around trolley wheels and equipment feet.The perforated face is supported by a welded tubular steel frame designed for concentrated loads.

Dirt enters an inaccessible plenum through permanently fixed grilles.The complete ventilation module lifts from the pedestal grid for cleaning and inspection below.

Типичные приложения

Unidirectional-flow cleanroomsSemiconductor fabrication areasData center cold aislesBattery and electronics process roomsTechnical spaces using underfloor air distribution

Технические параметры

Typical dimensions and material data for a framed perforated steel access-floor panel are listed below.

Основной материал	Welded tubular carbon-steel frame supporting a round-hole or slotted perforated steel top plate
Толщина панели	30–38 mm structural panel depth, excluding optional underside damper
эффективная ширина	600 mm nominal airflow-panel width
Максимальная длина	600 mm nominal modular panel length
Толщина линий стали	1.5–2.0 mm perforated steel top plate with reinforced frame sections
Плотность ядра	Approximately 7850 kg/m³ for the welded carbon-steel structure
Теплопроводимость	Approximately 45–60 W/(m·K) for the carbon-steel panel structure
Поверхностная отделка	Durable powder-coated steel with 15–38% standard free-area perforation patterns
Объединенный тип	Removable framed panel seated on gasketed pedestals or stringers with optional underside airflow damper
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Round-hole or slotted perforation patternApproximately 15%, 23%, 24% or 38% free air areaManual or actuator-ready airflow damperConductive coating and reinforced heavy-load frame

Planning a Perforated Steel Raised Access Floor specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой