Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Acero perforado piso de acceso elevado
A removable welded steel ventilation panel with round or slotted openings that delivers controlled airflow from a pressurized raised-floor plenum.
- 15–38% Free Air Area
- Underfloor Air Delivery
- Optional Volume-Control Damper
- Heavy-Duty Welded Frame
Introducción del producto
Perforated steel raised access flooring introduces supply air through selected modules in a solid access-floor field. Each panel uses a welded tubular steel frame and perforated top plate sized to remain stable under equipment and pedestrian loads. Round or slotted patterns provide several free-area ratios, allowing airflow capacity to be allocated by zone. A removable damper beneath the panel can balance air volume without changing the visible floor grid, and powder coating protects the exposed steel surfaces.
Características clave
A welded steel frame carries concentrated loads around the open ventilation field.
An optional underside damper permits local balancing of airflow from the pressurized plenum.
The module fits a conventional 600 mm pedestal grid and can replace a solid panel at required supply positions.
Preocupaciones del producto del cliente
A raised-floor air system needs predictable open area and balancing control without sacrificing panel stability or service access.
Uniform perforation across the room over-supplies some zones and starves high-load positions.Different hole patterns and free-area ratios allocate airflow where the process or equipment requires it.
Changing fan speed alone cannot balance individual floor outlets.An underside volume-control damper adjusts flow at each selected panel.
Thin perforated sheet flexes around trolley wheels and equipment feet.The perforated face is supported by a welded tubular steel frame designed for concentrated loads.
Dirt enters an inaccessible plenum through permanently fixed grilles.The complete ventilation module lifts from the pedestal grid for cleaning and inspection below.
Aplicaciones típicas
Unidirectional-flow cleanroomsSemiconductor fabrication areasData center cold aislesBattery and electronics process roomsTechnical spaces using underfloor air distribution
Parámetros técnicos
Typical dimensions and material data for a framed perforated steel access-floor panel are listed below.
| Materiales Core | Welded tubular carbon-steel frame supporting a round-hole or slotted perforated steel top plate |
|---|---|
| Panel de espesor | 30–38 mm structural panel depth, excluding optional underside damper |
| Ancho efectivo | 600 mm nominal airflow-panel width |
| Longitud máxima | 600 mm nominal modular panel length |
| Acero frente a espesor | 1.5–2.0 mm perforated steel top plate with reinforced frame sections |
| Densidad Core | Approximately 7850 kg/m³ for the welded carbon-steel structure |
| Conductividad térmica | Approximately 45–60 W/(m·K) for the carbon-steel panel structure |
| Superficie acabada | Durable powder-coated steel with 15–38% standard free-area perforation patterns |
| Tipo conjunto | Removable framed panel seated on gasketed pedestals or stringers with optional underside airflow damper |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Round-hole or slotted perforation patternApproximately 15%, 23%, 24% or 38% free air areaManual or actuator-ready airflow damperConductive coating and reinforced heavy-load frame
Planning a Perforated Steel Raised Access Floor specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
