English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Аксессуары для установки в чистых помещениях
Глотнительный материал для чистых помещений
A smooth, elastic joint sealant for closing cleanroom panel junctions and perimeter gaps without creating dirt-catching recesses.
- Low-Emission Chemistry
- Smooth Hygienic Finish
- Elastic Airtight Joint
- Cleaning-Agent Resistance
Введение продукции
Cleanroom sealant is a one-component moisture-curing polymer supplied in cartridges for controlled application along wall-panel seams, ceiling junctions, frames and service penetrations. Its non-sag body holds a shaped bead on vertical and overhead joints, while the cured elastomer accommodates small movements between dissimilar substrates. A fine, continuous surface reduces ledges where residue can collect and allows routine wipe-down around the sealed transition.
Основные характеристики
Elastic curing accommodates normal differential movement between coated steel, aluminum and adjacent finishes.
The tooled surface forms a continuous transition with fewer recesses for dust and cleaning residue.
Low-odor, low-emission formulations are available for sensitive controlled interiors.
Обеспокоенность клиентов продуктами
A cleanroom joint must remain airtight and cleanable while adjoining panels and frames move slightly in service.
Rigid fillers crack when metal panels and frames expand at different rates.The cured elastomer stretches and recovers across normal joint movement instead of forming a brittle bridge.
Rough beads retain dust and resist complete wipe-down.Controlled extrusion and tooling create a fine, continuous hygienic surface.
Poor adhesion opens bypass paths at coated metal or frame edges.Substrate-specific preparation and compatible primers establish continuous flank adhesion.
Deep joints consume excessive sealant and cure unevenly.A correctly sized backing material controls bead depth and preserves the intended joint profile.
Типичные приложения
Cleanroom wall-panel jointsCeiling-to-wall perimetersDoor and window frame interfacesService penetration finishingHygienic floor-to-wall transitions
Технические параметры
Typical construction and application ranges for a cartridge-applied cleanroom joint sealant are listed below.
| Основной материал | One-component silane-terminated polymer or polyurethane elastomer |
|---|---|
| Толщина панели | 2-15 mm recommended cured joint depth |
| эффективная ширина | 5-30 mm practical joint width |
| Максимальная длина | Up to 12000 mm continuous bead per prepared joint section |
| Толщина линий стали | 0.40-1.20 mm compatible coated-steel facing range |
| Плотность ядра | Approximately 1200-1600 kg/m³ uncured compound density |
| Теплопроводимость | Approximately 0.20-0.35 W/(m·K) for cured elastomer |
| Поверхностная отделка | Smooth tooled matte surface in white, gray or selected hygienic colors |
| Объединенный тип | Backer-controlled elastic butt, perimeter or transition joint |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
White or gray compoundLow-modulus or higher-strength gradeCompatible primer systemКартридж или упаковка из фольги
Planning a Cleanroom Sealant specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
