Three-quarter view of a cleanroom joint sealant cartridge with application nozzle

클린룸 설치 액세서리

클린룸 씰런트

A smooth, elastic joint sealant for closing cleanroom panel junctions and perimeter gaps without creating dirt-catching recesses.

Low-Emission Chemistry
Smooth Hygienic Finish
Elastic Airtight Joint
Cleaning-Agent Resistance

견적 요청 제품 찾아보기

상품 소개

Cleanroom sealant is a one-component moisture-curing polymer supplied in cartridges for controlled application along wall-panel seams, ceiling junctions, frames and service penetrations. Its non-sag body holds a shaped bead on vertical and overhead joints, while the cured elastomer accommodates small movements between dissimilar substrates. A fine, continuous surface reduces ledges where residue can collect and allows routine wipe-down around the sealed transition.

주요 기능

A non-sag consistency supports controlled beads on vertical wall and overhead ceiling joints.

Elastic curing accommodates normal differential movement between coated steel, aluminum and adjacent finishes.

The tooled surface forms a continuous transition with fewer recesses for dust and cleaning residue.

Low-odor, low-emission formulations are available for sensitive controlled interiors.

고객 제품 관심사

A cleanroom joint must remain airtight and cleanable while adjoining panels and frames move slightly in service.

Rigid fillers crack when metal panels and frames expand at different rates.The cured elastomer stretches and recovers across normal joint movement instead of forming a brittle bridge.

Rough beads retain dust and resist complete wipe-down.Controlled extrusion and tooling create a fine, continuous hygienic surface.

Poor adhesion opens bypass paths at coated metal or frame edges.Substrate-specific preparation and compatible primers establish continuous flank adhesion.

Deep joints consume excessive sealant and cure unevenly.A correctly sized backing material controls bead depth and preserves the intended joint profile.

일반적인 응용 프로그램

Cleanroom wall-panel jointsCeiling-to-wall perimetersDoor and window frame interfacesService penetration finishingHygienic floor-to-wall transitions

기술 매개변수

Typical construction and application ranges for a cartridge-applied cleanroom joint sealant are listed below.

핵심 재료	One-component silane-terminated polymer or polyurethane elastomer
패널 두께	2-15 mm recommended cured joint depth
유효 폭	5-30 mm practical joint width
최대 길이	Up to 12000 mm continuous bead per prepared joint section
강철 면면 두께	0.40-1.20 mm compatible coated-steel facing range
코어 밀도	Approximately 1200-1600 kg/m³ uncured compound density
열전도도 (Thermal Conductivity)	Approximately 0.20-0.35 W/(m·K) for cured elastomer
표면 마무리	Smooth tooled matte surface in white, gray or selected hygienic colors
접합 유형	Backer-controlled elastic butt, perimeter or transition joint
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

White or gray compoundLow-modulus or higher-strength gradeCompatible primer systemCartridge or foil-pack supply

Planning a Cleanroom Sealant specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.