Three-quarter view of a cleanroom joint sealant cartridge with application nozzle

クリーンルームの設置付属品

クリーンルームシーラント

A smooth, elastic joint sealant for closing cleanroom panel junctions and perimeter gaps without creating dirt-catching recesses.

Low-Emission Chemistry
Smooth Hygienic Finish
Elastic Airtight Joint
Cleaning-Agent Resistance

見積もりリクエスト製品案内

商品紹介

Cleanroom sealant is a one-component moisture-curing polymer supplied in cartridges for controlled application along wall-panel seams, ceiling junctions, frames and service penetrations. Its non-sag body holds a shaped bead on vertical and overhead joints, while the cured elastomer accommodates small movements between dissimilar substrates. A fine, continuous surface reduces ledges where residue can collect and allows routine wipe-down around the sealed transition.

主要な特徴

A non-sag consistency supports controlled beads on vertical wall and overhead ceiling joints.

Elastic curing accommodates normal differential movement between coated steel, aluminum and adjacent finishes.

The tooled surface forms a continuous transition with fewer recesses for dust and cleaning residue.

Low-odor, low-emission formulations are available for sensitive controlled interiors.

お客様の製品に関する懸念事項

A cleanroom joint must remain airtight and cleanable while adjoining panels and frames move slightly in service.

Rigid fillers crack when metal panels and frames expand at different rates.The cured elastomer stretches and recovers across normal joint movement instead of forming a brittle bridge.

Rough beads retain dust and resist complete wipe-down.Controlled extrusion and tooling create a fine, continuous hygienic surface.

Poor adhesion opens bypass paths at coated metal or frame edges.Substrate-specific preparation and compatible primers establish continuous flank adhesion.

Deep joints consume excessive sealant and cure unevenly.A correctly sized backing material controls bead depth and preserves the intended joint profile.

典型的な用途

Cleanroom wall-panel jointsCeiling-to-wall perimetersDoor and window frame interfacesService penetration finishingHygienic floor-to-wall transitions

技術的なパラメータ

Typical construction and application ranges for a cartridge-applied cleanroom joint sealant are listed below.

コア材料	One-component silane-terminated polymer or polyurethane elastomer
パネルの厚さ	2-15 mm recommended cured joint depth
有効幅	5-30 mm practical joint width
最大長さ	Up to 12000 mm continuous bead per prepared joint section
鋼鉄の厚さを直面する	0.40-1.20 mm compatible coated-steel facing range
コア密度	Approximately 1200-1600 kg/m³ uncured compound density
熱伝導率	Approximately 0.20-0.35 W/(m·K) for cured elastomer
表面仕上げ	Smooth tooled matte surface in white, gray or selected hygienic colors
ジョイントタイプ	Backer-controlled elastic butt, perimeter or transition joint
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

White or gray compoundLow-modulus or higher-strength gradeCompatible primer systemCartridge or foil-pack supply

Planning a Cleanroom Sealant specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する