Pair of white cleanroom boot covers with gray soles and ankle ties

Одежда для чистых комнат, ИПП и расходные материалы

Чистые комнаты Boot Covers

White mid-calf cleanroom boot covers with covered elastic tops, ankle ties, bound seams and gray slip-resistant soles.

White low-lint fabric extends to mid-calf
Covered shin elastic and ankle ties stabilize fit
Gray slip-resistant sole supports controlled walking

Введение продукции

Cleanroom Boot Covers provide higher leg coverage than ordinary overshoes for controlled gowning transitions. The white low-lint body encloses the footwear and lower leg, while a covered elastic top and two ankle ties help prevent sagging. A gray slip-resistant sole gives the boot cover a defined walking surface and bound seams keep construction edges contained.

Основные характеристики

Mid-calf body increases coverage above the ankle

Covered shin elastic retains the upper edge without exposed rubber

Two ankle ties secure excess volume around different footwear shapes

Gray textured sole provides a visible traction surface

Bound seams reduce exposed construction edges

Обеспокоенность клиентов продуктами

Boot covers must remain upright, secure and correctly oriented through gowning and movement. Loose uppers or poorly positioned ties can drag, while an unsuitable sole can reduce stability.

The upper section may slide down during walking.Use a covered elastic shin opening sized to retain the calf.

Excess material can bunch around the ankle.Secure the two ankle ties after positioning the footwear fully inside.

Ties may contact the floor during donning.Follow a controlled donning sequence that keeps tie ends elevated.

A smooth sole may be unsuitable for polished surfaces.Select a dedicated textured slip-resistant sole for the floor condition.

Типичные приложения

Used in pharmaceutical and biotechnology cleanrooms, medical-device manufacturing, laboratories, controlled filling areas and clean processing zones requiring extended footwear coverage.

Технические параметры

These ranges describe common disposable mid-calf cleanroom boot covers. Sterile presentation and sole material should be selected for the actual gowning protocol and floor.

Основной материал	Low-lint polyethylene or SMS polypropylene barrier fabric
Толщина панели	0.20–0.30 mm body material
эффективная ширина	300–380 mm calf circumference by size
Максимальная длина	460 mm boot height
Толщина линий стали	0 mm; no steel facing used
Плотность ядра	40–55 kg/m³ areal-mass equivalent structure
Теплопроводимость	0.04–0.07 W/(m·K), laminate dependent
Поверхностная отделка	White low-lint body with gray textured slip-resistant sole
Объединенный тип	Bound body seams, covered shin elastic and twin ankle ties
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Small through extra-large sizes16-inch or 18-inch heightGray gripper or PVC soleElastic ankle or twin tie retentionSterile paired or non-sterile bulk presentationClean-processed double-bag packaging

Planning a Cleanroom Boot Covers specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой