Pair of white cleanroom boot covers with gray soles and ankle ties

クリーンルーム衣料品、 PPE 、消耗品

クリーンルームのブートカバー

White mid-calf cleanroom boot covers with covered elastic tops, ankle ties, bound seams and gray slip-resistant soles.

White low-lint fabric extends to mid-calf
Covered shin elastic and ankle ties stabilize fit
Gray slip-resistant sole supports controlled walking

商品紹介

Cleanroom Boot Covers provide higher leg coverage than ordinary overshoes for controlled gowning transitions. The white low-lint body encloses the footwear and lower leg, while a covered elastic top and two ankle ties help prevent sagging. A gray slip-resistant sole gives the boot cover a defined walking surface and bound seams keep construction edges contained.

主要な特徴

Mid-calf body increases coverage above the ankle

Covered shin elastic retains the upper edge without exposed rubber

Two ankle ties secure excess volume around different footwear shapes

Gray textured sole provides a visible traction surface

Bound seams reduce exposed construction edges

お客様の製品に関する懸念事項

Boot covers must remain upright, secure and correctly oriented through gowning and movement. Loose uppers or poorly positioned ties can drag, while an unsuitable sole can reduce stability.

The upper section may slide down during walking.Use a covered elastic shin opening sized to retain the calf.

Excess material can bunch around the ankle.Secure the two ankle ties after positioning the footwear fully inside.

Ties may contact the floor during donning.Follow a controlled donning sequence that keeps tie ends elevated.

A smooth sole may be unsuitable for polished surfaces.Select a dedicated textured slip-resistant sole for the floor condition.

典型的な用途

Used in pharmaceutical and biotechnology cleanrooms, medical-device manufacturing, laboratories, controlled filling areas and clean processing zones requiring extended footwear coverage.

技術的なパラメータ

These ranges describe common disposable mid-calf cleanroom boot covers. Sterile presentation and sole material should be selected for the actual gowning protocol and floor.

コア材料	Low-lint polyethylene or SMS polypropylene barrier fabric
パネルの厚さ	0.20–0.30 mm body material
有効幅	300–380 mm calf circumference by size
最大長さ	460 mm boot height
鋼鉄の厚さを直面する	0 mm; no steel facing used
コア密度	40–55 kg/m³ areal-mass equivalent structure
熱伝導率	0.04–0.07 W/(m·K), laminate dependent
表面仕上げ	White low-lint body with gray textured slip-resistant sole
ジョイントタイプ	Bound body seams, covered shin elastic and twin ankle ties
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Small through extra-large sizes16-inch or 18-inch heightGray gripper or PVC soleElastic ankle or twin tie retentionSterile paired or non-sterile bulk presentationClean-processed double-bag packaging

Planning a Cleanroom Boot Covers specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する