Aluminum-framed cleanroom window with sealed clear glazing

Двери в чистых помещениях, окна и системы блокировки

Алюминиевые оконные рамки чистых комнат

A modular observation window using precision-extruded aluminum profiles and fixed safety glazing for cleanroom walls that prioritize low weight and dimensional accuracy.

Extruded Aluminum Frame
Low-Weight Assembly
Anodized or Powder Coated
Modular Wall Fit

Запрос котировки Просмотреть продукты

Введение продукции

The aluminum-framed cleanroom window uses accurately extruded perimeter profiles to locate glazing, conceal fasteners and connect with modular wall panels. Aluminum reduces assembly weight and supports long straight frame members, while anodized or powder-coated finishes provide a smooth cleanable surface. Single, insulated and double-flush glazing configurations can share the same coordinated wall-opening concept.

Основные характеристики

Extruded profiles provide repeatable glazing pockets and straight perimeter reveals.

Lower frame mass simplifies handling of larger observation panels during modular installation.

Anodized and polyester powder-coated finishes offer color and corrosion options for indoor clean areas.

Replaceable gaskets and mechanically assembled profiles allow controlled glass replacement.

Обеспокоенность клиентов продуктами

An aluminum window must combine low weight with a rigid sealed opening and a finish that does not introduce exposed grooves or loose cover strips.

Heavy fabricated frames are difficult to position in lightweight modular walls.Aluminum extrusions reduce frame weight while maintaining a rigid closed perimeter.

Generic storefront profiles leave deep glazing channels exposed to the room.Cleanroom-specific covers and flush seals close the profile recesses on visible faces.

Frame color does not match the selected cleanroom panel finish.Clear anodizing and project-selected powder coating provide coordinated appearance options.

Типичные приложения

Modular pharmaceutical cleanroomsElectronics assembly roomsLaboratory partitionsClean manufacturing viewing corridors

Технические параметры

Typical material and dimensional ranges for an aluminum-framed cleanroom window are shown below.

Основной материал	Tempered safety glazing retained in 6063-T5/T6 extruded aluminum profiles
Толщина панели	40–150 mm overall frame depth; 6–12 mm individual panes
эффективная ширина	300–2000 mm clear viewing width
Максимальная длина	3000 mm overall window height
Толщина линий стали	0 mm — all-aluminum frame has no steel facing
Плотность ядра	Approximately 2500 kg/m³ for glass; solid aluminum frame has no insulation core
Теплопроводимость	Approximately 1.0 W/(m·K) for glass; aluminum frame may use an optional thermal break
Поверхностная отделка	Clear anodized, color anodized or polyester powder-coated aluminum
Объединенный тип	Mechanically assembled extrusion with replaceable EPDM glazing gaskets and sealed perimeter
Customization	Доступно в зависимости от предполагаемого приложения и операционной среды

Доступные варианты

Single, insulated or double-flush glazingClear anodized or RAL powder coatThermal-break profileIntegral blind or tinted glass

Planning a Aluminum-Framed Cleanroom Window specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой