English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Запчасти для оборудования для чистых помещений
Подшипник AHU
A precision deep-groove ball bearing with optional contact seals for supporting matched AHU motor or blower shafts under radial and moderate axial loads.
- Deep-Groove Raceway
- Precision Steel Balls
- Optional Contact Seals
- Matched Shaft Fit
Введение продукции
The AHU bearing is a single-row deep-groove rolling bearing selected for compatible fan motors, blower shafts or bearing cartridges. Hardened steel inner and outer rings contain one row of precision balls separated by a cage, while optional elastomer seals retain lubricant and restrict contaminant entry. The deep raceways support radial load and moderate axial load in either direction, making this construction common in rotating air-moving equipment. Replacement selection must match the original bore, outside diameter, width, internal clearance, closure arrangement, speed and fit rather than using shaft diameter as the only criterion.
Основные характеристики
Precision-ground rings and uniformly spaced balls support stable rotation when the shaft and housing seats are correctly aligned.
Removable or factory-installed elastomer seals help retain grease and limit dust ingress in enclosed AHU service positions.
Standardized boundary dimensions simplify interchange when the complete bearing designation and clearance suffix are verified.
Обеспокоенность клиентов продуктами
Bearing life depends on matching dimensions and internal design while preventing damage during storage, mounting, lubrication and shaft alignment.
The same bore size is available in several outside diameters, widths, clearances and closure styles.The complete designation and measured bore, outer diameter and width are checked before an interchange is selected.
An overly tight fit or impact through the wrong ring can brinell the raceway before the fan returns to service.Mounting force is applied only to the ring being fitted, using controlled tooling and the specified shaft and housing tolerances.
Open, shielded and contact-sealed bearings differ in grease retention, friction and contamination protection.The closure and lubricant arrangement are selected for the installed speed, access and cleanliness conditions.
Shaft misalignment or fan imbalance produces vibration and uneven bearing loading.The replacement is combined with shaft-seat inspection, alignment checks and verification of the rotating fan assembly.
Типичные приложения
AHU fan motor shaftsBelt-driven blower bearing cartridgesCleanroom exhaust fan assembliesVentilation equipment overhaul
Технические параметры
Typical construction and boundary ranges for compact single-row AHU deep-groove ball bearings are listed below.
| Основной материал | Through-hardened chromium bearing-steel rings and balls with steel cage and optional NBR seals |
|---|---|
| Толщина панели | 8-35 mm nominal bearing width |
| эффективная ширина | 10-80 mm nominal shaft bore |
| Максимальная длина | Up to 170 mm nominal outside diameter for common AHU selections |
| Толщина линий стали | 2-18 mm radial ring section, dependent on bearing series |
| Плотность ядра | Approximately 7810-7850 kg/m³ for chromium bearing steel |
| Теплопроводимость | Approximately 42-46 W/(m·K) for hardened bearing steel |
| Поверхностная отделка | Precision-ground silver race surfaces with preserved steel or dark NBR closure faces |
| Объединенный тип | Single-row deep-groove rolling contact with press-fit inner and outer ring seats |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Open, shielded or contact-sealed closureNormal or increased internal clearanceAlternative cage materialMatched bore and boundary series
Planning a AHU Bearing specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
