Three-quarter view of a complete AHU deep-groove bearing with separated rubber seal

クリーンルーム機器のスペアパーツ

AHU 軸受

A precision deep-groove ball bearing with optional contact seals for supporting matched AHU motor or blower shafts under radial and moderate axial loads.

Deep-Groove Raceway
Precision Steel Balls
Optional Contact Seals
Matched Shaft Fit

見積もりリクエスト製品案内

商品紹介

The AHU bearing is a single-row deep-groove rolling bearing selected for compatible fan motors, blower shafts or bearing cartridges. Hardened steel inner and outer rings contain one row of precision balls separated by a cage, while optional elastomer seals retain lubricant and restrict contaminant entry. The deep raceways support radial load and moderate axial load in either direction, making this construction common in rotating air-moving equipment. Replacement selection must match the original bore, outside diameter, width, internal clearance, closure arrangement, speed and fit rather than using shaft diameter as the only criterion.

主要な特徴

Deep raceway grooves guide a single ball row and accommodate combined radial and moderate bidirectional axial loading.

Precision-ground rings and uniformly spaced balls support stable rotation when the shaft and housing seats are correctly aligned.

Removable or factory-installed elastomer seals help retain grease and limit dust ingress in enclosed AHU service positions.

Standardized boundary dimensions simplify interchange when the complete bearing designation and clearance suffix are verified.

お客様の製品に関する懸念事項

Bearing life depends on matching dimensions and internal design while preventing damage during storage, mounting, lubrication and shaft alignment.

The same bore size is available in several outside diameters, widths, clearances and closure styles.The complete designation and measured bore, outer diameter and width are checked before an interchange is selected.

An overly tight fit or impact through the wrong ring can brinell the raceway before the fan returns to service.Mounting force is applied only to the ring being fitted, using controlled tooling and the specified shaft and housing tolerances.

Open, shielded and contact-sealed bearings differ in grease retention, friction and contamination protection.The closure and lubricant arrangement are selected for the installed speed, access and cleanliness conditions.

Shaft misalignment or fan imbalance produces vibration and uneven bearing loading.The replacement is combined with shaft-seat inspection, alignment checks and verification of the rotating fan assembly.

典型的な用途

AHU fan motor shaftsBelt-driven blower bearing cartridgesCleanroom exhaust fan assembliesVentilation equipment overhaul

技術的なパラメータ

Typical construction and boundary ranges for compact single-row AHU deep-groove ball bearings are listed below.

コア材料	Through-hardened chromium bearing-steel rings and balls with steel cage and optional NBR seals
パネルの厚さ	8-35 mm nominal bearing width
有効幅	10-80 mm nominal shaft bore
最大長さ	Up to 170 mm nominal outside diameter for common AHU selections
鋼鉄の厚さを直面する	2-18 mm radial ring section, dependent on bearing series
コア密度	Approximately 7810-7850 kg/m³ for chromium bearing steel
熱伝導率	Approximately 42-46 W/(m·K) for hardened bearing steel
表面仕上げ	Precision-ground silver race surfaces with preserved steel or dark NBR closure faces
ジョイントタイプ	Single-row deep-groove rolling contact with press-fit inner and outer ring seats
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Open, shielded or contact-sealed closureNormal or increased internal clearanceAlternative cage materialMatched bore and boundary series

Planning a AHU Bearing specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する