English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Воздушные фильтры и химическая фильтрация
Активированный угольный фильтр
A shallow molecular panel that places activated carbon in a bonded pleat or contained loose-fill bed for odor and VOC adsorption in HVAC systems.
- Broad-Spectrum Carbon Media
- Shallow Panel Format
- Low-Load Odor Control
- Standard HVAC Face Sizes
Введение продукции
The activated carbon panel filter provides a compact gas-phase filtration stage for air handlers and recirculation units with limited depth. Activated carbon is either bonded to a porous support and pleated or retained as a thin granular bed between perforated screens. A galvanized-steel or moisture-resistant polymer frame holds the adsorbent uniformly across the face. The panel is suited to moderate concentrations of odors, ozone and volatile organic compounds, especially where a conventional particulate prefilter can protect the carbon surface from dust.
Основные характеристики
The 25–100 mm panel depth fits standard HVAC holding frames without a separate deep-bed vessel.
Bonded or screened media construction limits loose-carbon movement and helps maintain an even bed.
A rigid perimeter frame supports front-access replacement in supply, return or recirculation sections.
Обеспокоенность клиентов продуктами
Low-level gases and odors pass through ordinary particle filters, but many air handlers have room for only a shallow additional stage.
A particulate prefilter leaves VOCs and nuisance odors in the supply air.The activated-carbon layer adsorbs molecular contaminants that are too small for mechanical particle media.
A deep loose-fill carbon bank cannot fit the existing air handler.The shallow panel format adds a practical molecular stage within standard filter tracks.
Loose granules settle and create low-resistance bypass channels.Bonded carbon media or restrained screened cells hold the adsorbent evenly over the face.
Dust coats the carbon and blocks access to its internal pore structure.Using the panel behind an appropriate particulate prefilter protects available adsorption sites.
Типичные приложения
Office and commercial HVAC odor controlCleanroom make-up air polishingLaboratory recirculation systemsMuseum and archive ventilationOutdoor-air intakes near traffic
Технические параметры
Typical construction ranges for activated-carbon molecular panel filters are listed below.
| Основной материал | Bonded activated-carbon nonwoven or granular activated carbon retained between porous support screens |
|---|---|
| Толщина панели | 25–100 mm overall panel depth |
| эффективная ширина | 287–610 mm nominal face width |
| Максимальная длина | Up to 610 mm nominal face height |
| Толщина линий стали | 0.5–0.8 mm galvanized-steel frame or perforated retaining screen |
| Плотность ядра | Approximately 400–600 kg/m³ bulk density for granular activated carbon |
| Теплопроводимость | Approximately 0.10–0.25 W/(m·K) for the dry activated-carbon bed |
| Поверхностная отделка | Mill-galvanized steel, stainless steel or black moisture-resistant polymer frame |
| Объединенный тип | Flat-panel gasket or slide-in header connection for standard holding frames |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Coconut-shell or coal-based activated carbonBonded pleat or loose-fill panelGalvanized, stainless or polymer frameImpregnated media for selected acidic or basic gases
Planning a Activated Carbon Panel Filter specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
