Three-quarter view of black activated carbon panel filter in galvanized frame

エアフィルターと化学ろ過

A 活性炭パネルフィルター

A shallow molecular panel that places activated carbon in a bonded pleat or contained loose-fill bed for odor and VOC adsorption in HVAC systems.

Broad-Spectrum Carbon Media
Shallow Panel Format
Low-Load Odor Control
Standard HVAC Face Sizes

見積もりリクエスト製品案内

商品紹介

The activated carbon panel filter provides a compact gas-phase filtration stage for air handlers and recirculation units with limited depth. Activated carbon is either bonded to a porous support and pleated or retained as a thin granular bed between perforated screens. A galvanized-steel or moisture-resistant polymer frame holds the adsorbent uniformly across the face. The panel is suited to moderate concentrations of odors, ozone and volatile organic compounds, especially where a conventional particulate prefilter can protect the carbon surface from dust.

主要な特徴

Broad-spectrum activated carbon adsorbs many common organic vapours and nuisance odors from moving air.

The 25–100 mm panel depth fits standard HVAC holding frames without a separate deep-bed vessel.

Bonded or screened media construction limits loose-carbon movement and helps maintain an even bed.

A rigid perimeter frame supports front-access replacement in supply, return or recirculation sections.

お客様の製品に関する懸念事項

Low-level gases and odors pass through ordinary particle filters, but many air handlers have room for only a shallow additional stage.

A particulate prefilter leaves VOCs and nuisance odors in the supply air.The activated-carbon layer adsorbs molecular contaminants that are too small for mechanical particle media.

A deep loose-fill carbon bank cannot fit the existing air handler.The shallow panel format adds a practical molecular stage within standard filter tracks.

Loose granules settle and create low-resistance bypass channels.Bonded carbon media or restrained screened cells hold the adsorbent evenly over the face.

Dust coats the carbon and blocks access to its internal pore structure.Using the panel behind an appropriate particulate prefilter protects available adsorption sites.

典型的な用途

Office and commercial HVAC odor controlCleanroom make-up air polishingLaboratory recirculation systemsMuseum and archive ventilationOutdoor-air intakes near traffic

技術的なパラメータ

Typical construction ranges for activated-carbon molecular panel filters are listed below.

コア材料	Bonded activated-carbon nonwoven or granular activated carbon retained between porous support screens
パネルの厚さ	25–100 mm overall panel depth
有効幅	287–610 mm nominal face width
最大長さ	最大 610 mm 公称面高
鋼鉄の厚さを直面する	0.5–0.8 mm galvanized-steel frame or perforated retaining screen
コア密度	Approximately 400–600 kg/m³ bulk density for granular activated carbon
熱伝導率	Approximately 0.10–0.25 W/(m·K) for the dry activated-carbon bed
表面仕上げ	Mill-galvanized steel, stainless steel or black moisture-resistant polymer frame
ジョイントタイプ	Flat-panel gasket or slide-in header connection for standard holding frames
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Coconut-shell or coal-based activated carbonBonded pleat or loose-fill panelGalvanized, stainless or polymer frameImpregnated media for selected acidic or basic gases

Planning a Activated Carbon Panel Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する