Three-quarter view of black activated carbon panel filter in galvanized frame

공기 필터 및 화학 여과

활성 탄소 패널 필터

A shallow molecular panel that places activated carbon in a bonded pleat or contained loose-fill bed for odor and VOC adsorption in HVAC systems.

Broad-Spectrum Carbon Media
Shallow Panel Format
Low-Load Odor Control
Standard HVAC Face Sizes

견적 요청 제품 찾아보기

상품 소개

The activated carbon panel filter provides a compact gas-phase filtration stage for air handlers and recirculation units with limited depth. Activated carbon is either bonded to a porous support and pleated or retained as a thin granular bed between perforated screens. A galvanized-steel or moisture-resistant polymer frame holds the adsorbent uniformly across the face. The panel is suited to moderate concentrations of odors, ozone and volatile organic compounds, especially where a conventional particulate prefilter can protect the carbon surface from dust.

주요 기능

Broad-spectrum activated carbon adsorbs many common organic vapours and nuisance odors from moving air.

The 25–100 mm panel depth fits standard HVAC holding frames without a separate deep-bed vessel.

Bonded or screened media construction limits loose-carbon movement and helps maintain an even bed.

A rigid perimeter frame supports front-access replacement in supply, return or recirculation sections.

고객 제품 관심사

Low-level gases and odors pass through ordinary particle filters, but many air handlers have room for only a shallow additional stage.

A particulate prefilter leaves VOCs and nuisance odors in the supply air.The activated-carbon layer adsorbs molecular contaminants that are too small for mechanical particle media.

A deep loose-fill carbon bank cannot fit the existing air handler.The shallow panel format adds a practical molecular stage within standard filter tracks.

Loose granules settle and create low-resistance bypass channels.Bonded carbon media or restrained screened cells hold the adsorbent evenly over the face.

Dust coats the carbon and blocks access to its internal pore structure.Using the panel behind an appropriate particulate prefilter protects available adsorption sites.

일반적인 응용 프로그램

Office and commercial HVAC odor controlCleanroom make-up air polishingLaboratory recirculation systemsMuseum and archive ventilationOutdoor-air intakes near traffic

기술 매개변수

Typical construction ranges for activated-carbon molecular panel filters are listed below.

핵심 재료	Bonded activated-carbon nonwoven or granular activated carbon retained between porous support screens
패널 두께	25–100 mm overall panel depth
유효 폭	287 - 610 mm 공칭 면 폭
최대 길이	최대 610 mm 공칭 표면 높이
강철 면면 두께	0.5–0.8 mm galvanized-steel frame or perforated retaining screen
코어 밀도	Approximately 400–600 kg/m³ bulk density for granular activated carbon
열전도도 (Thermal Conductivity)	Approximately 0.10–0.25 W/(m·K) for the dry activated-carbon bed
표면 마무리	Mill-galvanized steel, stainless steel or black moisture-resistant polymer frame
접합 유형	Flat-panel gasket or slide-in header connection for standard holding frames
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Coconut-shell or coal-based activated carbonBonded pleat or loose-fill panelGalvanized, stainless or polymer frameImpregnated media for selected acidic or basic gases

Planning a Activated Carbon Panel Filter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.