Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Vestuário para sala limpa, EPI e consumíveis
Z Tacky Roller (em inglês)
Cleanroom tacky roller with peel-away LDPE adhesive film and a reusable handle for removing loose particles from floors, walls and work surfaces.
- Peel-away LDPE adhesive film refill
- Dry particle pickup for broad cleanroom surfaces
- Reusable low-shedding roller handle
Introdução do produto
The Tacky Roller provides dry contamination pickup across smooth controlled-area surfaces. A cylindrical refill of LDPE film carries a consistent water-based acrylic adhesive that collects loose dust as the roller travels. Perforated or pre-cut outer sheets can be removed when loaded, exposing a fresh tacky layer without liquid cleaner. The refill mounts on a reusable plastic or stainless-steel frame selected for bench, wall or floor reach.
Características-chave
Water-based acrylic adhesive supports low-residue particle pickup
Multiple widths cover benches, panels, walls and floors efficiently
Clean polymer core avoids paper-fiber shedding
Reusable frame separates durable hardware from disposable film
Preocupações do produto do cliente
A cleanroom roller must pick up particles without transferring adhesive, shedding core material or forcing frequent tool replacement. Width, tack and handle reach should match the cleaned surface and operator method.
Excessive tack may leave residue on sensitive panels.Select a tack grade compatible with the substrate and verify it on a representative area.
A loaded outer layer can redistribute captured debris.Remove the contaminated sheet at a defined loading point using its perforation.
Paperboard cores may introduce fibers into the controlled area.Specify a clean polyethylene core and individually protected refill.
An unsuitable handle length can make wall or floor cleaning inefficient.Pair narrow hand rollers with benches and extended frames with walls or floors.
Aplicações típicas
Designed for cleanroom floors, walls, ceilings, workstations, glass panels, electronics work surfaces, equipment housings and other smooth areas requiring dry particle removal.
Parâmetros técnicos
The ranges below cover common peelable cleanroom film rollers. Final width, film gauge, tack grade, core geometry and frame material should be matched to the cleaning procedure.
| Material principal | LDPE peel-away film on a clean polyethylene roller core |
|---|---|
| Painel de espessura | 0.04-0.05 mm per adhesive film layer |
| Largura efetiva | 100-457 mm |
| Comprimento máximo | 18000 mm of film per refill |
| Aço enfrentando espessura | 0 mm on refill; optional stainless-steel handle frame |
| Densidade Core | 910-940 kg/m³ LDPE film |
| Condutividade térmica | 0.33-0.50 W/(m·K), film formulation dependent |
| Superfície acabado | Smooth blue, white or clear tacky film with peel perforations |
| Tipo conjunto | Replaceable roll core on reusable axle handle with peel-away outer sheets |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
100, 160, 229, 300 or 457 mm working widthBlue, white or transparent filmLow, medium or high tackHand frame or extended floor handlePlastic or stainless-steel handle frameIndividually bagged replacement refills
Planning a Tacky Roller specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
