Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Tacky à rouleaux
Cleanroom tacky roller with peel-away LDPE adhesive film and a reusable handle for removing loose particles from floors, walls and work surfaces.
- Peel-away LDPE adhesive film refill
- Dry particle pickup for broad cleanroom surfaces
- Reusable low-shedding roller handle
Introduction de produit
The Tacky Roller provides dry contamination pickup across smooth controlled-area surfaces. A cylindrical refill of LDPE film carries a consistent water-based acrylic adhesive that collects loose dust as the roller travels. Perforated or pre-cut outer sheets can be removed when loaded, exposing a fresh tacky layer without liquid cleaner. The refill mounts on a reusable plastic or stainless-steel frame selected for bench, wall or floor reach.
Key Features
Water-based acrylic adhesive supports low-residue particle pickup
Multiple widths cover benches, panels, walls and floors efficiently
Clean polymer core avoids paper-fiber shedding
Reusable frame separates durable hardware from disposable film
Préoccupations du client produit
A cleanroom roller must pick up particles without transferring adhesive, shedding core material or forcing frequent tool replacement. Width, tack and handle reach should match the cleaned surface and operator method.
Excessive tack may leave residue on sensitive panels.Select a tack grade compatible with the substrate and verify it on a representative area.
A loaded outer layer can redistribute captured debris.Remove the contaminated sheet at a defined loading point using its perforation.
Paperboard cores may introduce fibers into the controlled area.Specify a clean polyethylene core and individually protected refill.
An unsuitable handle length can make wall or floor cleaning inefficient.Pair narrow hand rollers with benches and extended frames with walls or floors.
Les applications typiques
Designed for cleanroom floors, walls, ceilings, workstations, glass panels, electronics work surfaces, equipment housings and other smooth areas requiring dry particle removal.
Paramètres techniques
The ranges below cover common peelable cleanroom film rollers. Final width, film gauge, tack grade, core geometry and frame material should be matched to the cleaning procedure.
| Matériaux de base | LDPE peel-away film on a clean polyethylene roller core |
|---|---|
| Panneau épaisseur | 0.04-0.05 mm per adhesive film layer |
| Largeur effective | 100-457 mm |
| Longueur maximale | 18000 mm of film per refill |
| Acier face épaisseur | 0 mm on refill; optional stainless-steel handle frame |
| Densité Core | 910-940 kg/m³ LDPE film |
| Conductivité thermique | 0.33-0.50 W/(m·K), film formulation dependent |
| surface finie | Smooth blue, white or clear tacky film with peel perforations |
| Type joint | Replaceable roll core on reusable axle handle with peel-away outer sheets |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
100, 160, 229, 300 or 457 mm working widthBlue, white or transparent filmLow, medium or high tackHand frame or extended floor handlePlastic or stainless-steel handle frameIndividually bagged replacement refills
Planning a Tacky Roller specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
