Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Utilidade de Cleanroom
Trocador de calor de placa sanitária
A configurable gasketed plate-and-frame exchanger that provides efficient heating, cooling or heat recovery while preserving a cleanable hygienic flow path.
- 316L corrugated plate pack
- Cleanable hygienic flow channels
- Expandable thermal capacity
Introdução do produto
The sanitary plate heat exchanger transfers heat through a compressed pack of thin corrugated stainless plates. Alternating product and utility channels provide high surface area in a compact frame, while hygienic port geometry, compatible gaskets and accessible plate surfaces support inspection and cleaning.
Características-chave
High-area chevron plate pattern
Gasketed serviceable plate pack
Hygienic clamp connection options
Uniform port-to-channel distribution
Adjustable compression frame
Expandable plate count
Optional double-wall plate arrangement
Preocupações do produto do cliente
Reliable hygienic heat transfer depends on correct plate selection, gasket compatibility, uniform tightening and flow conditions that limit fouling.
Product fouls poorly distributed channelsSelect hygienic distribution areas and plate patterns suited to viscosity and solids loading.
Utility fluid could cross-contaminate productUse a double-wall plate option or monitored pressure strategy where risk assessment requires added separation.
Gaskets deteriorate under chemicals or heatMatch EPDM, NBR or alternative gasket compounds to temperature and cleaning chemistry.
Uneven tightening causes leakageCompress the plate pack uniformly to the specified frame dimension and inspect tie bars during service.
Aplicações típicas
Purified Water heating and coolingBiopharmaceutical buffer temperature controlFood and beverage pasteurizationCIP solution heat recoveryPersonal-care product processing
Parâmetros técnicos
Plate count, channel gap, port size, frame rating and gasket compound are selected for the required fluids and thermal duty.
| Material principal | 316L stainless steel heat-transfer plates with selected hygienic elastomer gaskets |
|---|---|
| Painel de espessura | Corrugated heat-transfer plates typically 0.5–0.8 mm |
| Largura efetiva | Plate-pack effective width typically 200–1200 mm |
| Comprimento máximo | Complete frame length typically up to 5000 mm depending on plate count |
| Aço enfrentando espessura | Frame pressure plates typically 12–50 mm |
| Densidade Core | 316L stainless steel density approximately 8000 kg/m³ |
| Condutividade térmica | 316L plate material approximately 15 W/(m·K) at ambient temperature |
| Superfície acabado | Formed stainless plate surfaces with smooth hygienic ports and coated or stainless frame |
| Tipo conjunto | Gasketed plate channels compressed by tie bars, with sanitary clamp or hygienic threaded ports |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
EPDM or NBR gasketsSingle- or double-wall platesAlternative plate alloysInsulated coverStainless frameVariable plate countClamp or hygienic threaded ports
Planning a Sanitary Plate Heat Exchanger specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
