English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة المرافق الغرف النظيفة
لوحة صحية المبادل الحراري
A configurable gasketed plate-and-frame exchanger that provides efficient heating, cooling or heat recovery while preserving a cleanable hygienic flow path.
- 316L corrugated plate pack
- Cleanable hygienic flow channels
- Expandable thermal capacity
مقدمة المنتج
The sanitary plate heat exchanger transfers heat through a compressed pack of thin corrugated stainless plates. Alternating product and utility channels provide high surface area in a compact frame, while hygienic port geometry, compatible gaskets and accessible plate surfaces support inspection and cleaning.
الخصائص الرئيسية
High-area chevron plate pattern
Gasketed serviceable plate pack
Hygienic clamp connection options
Uniform port-to-channel distribution
Adjustable compression frame
Expandable plate count
Optional double-wall plate arrangement
مخاوف المنتج للعملاء
Reliable hygienic heat transfer depends on correct plate selection, gasket compatibility, uniform tightening and flow conditions that limit fouling.
Product fouls poorly distributed channelsSelect hygienic distribution areas and plate patterns suited to viscosity and solids loading.
Utility fluid could cross-contaminate productUse a double-wall plate option or monitored pressure strategy where risk assessment requires added separation.
Gaskets deteriorate under chemicals or heatMatch EPDM, NBR or alternative gasket compounds to temperature and cleaning chemistry.
Uneven tightening causes leakageCompress the plate pack uniformly to the specified frame dimension and inspect tie bars during service.
تطبيقات نموذجية
Purified Water heating and coolingBiopharmaceutical buffer temperature controlFood and beverage pasteurizationCIP solution heat recoveryPersonal-care product processing
المعلمات الفنية
Plate count, channel gap, port size, frame rating and gasket compound are selected for the required fluids and thermal duty.
| المواد الأساسية | 316L stainless steel heat-transfer plates with selected hygienic elastomer gaskets |
|---|---|
| سمك اللوحة | Corrugated heat-transfer plates typically 0.5–0.8 mm |
| العرض الفعال | Plate-pack effective width typically 200–1200 mm |
| الحد الأقصى الطول | Complete frame length typically up to 5000 mm depending on plate count |
| الصلب يواجه سمك | Frame pressure plates typically 12–50 mm |
| الكثافة الأساسية | 316L stainless steel density approximately 8000 kg/m³ |
| الموصلية الحرارية | 316L plate material approximately 15 W/(m·K) at ambient temperature |
| إنهاء السطح | Formed stainless plate surfaces with smooth hygienic ports and coated or stainless frame |
| نوع المشترك | Gasketed plate channels compressed by tie bars, with sanitary clamp or hygienic threaded ports |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
EPDM or NBR gasketsSingle- or double-wall platesAlternative plate alloysInsulated coverStainless frameVariable plate countClamp or hygienic threaded ports
Planning a Sanitary Plate Heat Exchanger specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
