Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Botão de liberação de porta de emergência redefinível
A protected green manual release unit that interrupts or signals the access-control circuit when emergency door unlocking is required.
- Resettable Operation
- Protective Clear Cover
- Dual Status Indicators
- Emergency Release Contacts
Introdução do produto
The resettable emergency door release button provides a deliberate manual action independent of normal credential control. Lifting the clear protective cover and pressing the center panel changes the internal contact state so the access system can release its fail-safe lock or register an emergency command. A reset key returns the mechanism after the event, eliminating the glass fragments and consumable insert associated with traditional break-glass units.
Características-chave
A clear hinged cover helps prevent accidental activation during routine corridor activity.
The resettable mechanism can be restored with a service key after inspection.
Separate contact sets and red/green indicators support local and controller status feedback.
Preocupações do produto do cliente
Emergency release must remain obvious and immediately available without being triggered casually during normal operation.
An unprotected push button is activated by trolleys or routine cleaning.A transparent hinged cover shields the deliberate central press area.
Break-glass units require replacement parts after every operation.The spring-latched center panel is restored using a reusable reset key.
Staff cannot confirm whether the emergency circuit has returned to normal.Red and green indicators provide distinct activated and standby feedback.
Aplicações típicas
Cleanroom emergency exitsPersonnel airlock release pointsLaboratory access doorsHospital controlled corridors
Parâmetros técnicos
Typical construction data for a surface-mounted resettable emergency release unit are listed below.
| Material principal | Resettable microswitch mechanism and FR-4 indicator board in a PC/ABS housing |
|---|---|
| Painel de espessura | Approximately 50–60 mm installed housing depth |
| Largura efetiva | Approximately 85–95 mm housing width |
| Comprimento máximo | Approximately 95–110 mm overall housing length |
| Aço enfrentando espessura | 1.0–1.2 mm optional stainless-steel mounting backplate |
| Densidade Core | Approximately 1040–1200 kg/m³ for the PC/ABS enclosure material |
| Condutividade térmica | Approximately 0.17–0.23 W/(m·K) for the PC/ABS housing |
| Superfície acabado | Moulded emergency-green PC/ABS with clear polycarbonate protective cover |
| Tipo conjunto | Surface wall-box mounting with hinged cover, gasket and screw-terminal contacts |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Single- or double-pole contacts12 or 24 VDC indicatorsSurface or flush back boxAudible local alarm contact
Planning a Resettable Emergency Door Release Button specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
