Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Botón de liberación de la puerta de emergencia
A protected green manual release unit that interrupts or signals the access-control circuit when emergency door unlocking is required.
- Resettable Operation
- Protective Clear Cover
- Dual Status Indicators
- Emergency Release Contacts
Introducción del producto
The resettable emergency door release button provides a deliberate manual action independent of normal credential control. Lifting the clear protective cover and pressing the center panel changes the internal contact state so the access system can release its fail-safe lock or register an emergency command. A reset key returns the mechanism after the event, eliminating the glass fragments and consumable insert associated with traditional break-glass units.
Características clave
A clear hinged cover helps prevent accidental activation during routine corridor activity.
The resettable mechanism can be restored with a service key after inspection.
Separate contact sets and red/green indicators support local and controller status feedback.
Preocupaciones del producto del cliente
Emergency release must remain obvious and immediately available without being triggered casually during normal operation.
An unprotected push button is activated by trolleys or routine cleaning.A transparent hinged cover shields the deliberate central press area.
Break-glass units require replacement parts after every operation.The spring-latched center panel is restored using a reusable reset key.
Staff cannot confirm whether the emergency circuit has returned to normal.Red and green indicators provide distinct activated and standby feedback.
Aplicaciones típicas
Cleanroom emergency exitsPersonnel airlock release pointsLaboratory access doorsHospital controlled corridors
Parámetros técnicos
Typical construction data for a surface-mounted resettable emergency release unit are listed below.
| Materiales Core | Resettable microswitch mechanism and FR-4 indicator board in a PC/ABS housing |
|---|---|
| Panel de espesor | Approximately 50–60 mm installed housing depth |
| Ancho efectivo | Approximately 85–95 mm housing width |
| Longitud máxima | Approximately 95–110 mm overall housing length |
| Acero frente a espesor | 1.0–1.2 mm optional stainless-steel mounting backplate |
| Densidad Core | Approximately 1040–1200 kg/m³ for the PC/ABS enclosure material |
| Conductividad térmica | Approximately 0.17–0.23 W/(m·K) for the PC/ABS housing |
| Superficie acabada | Moulded emergency-green PC/ABS with clear polycarbonate protective cover |
| Tipo conjunto | Surface wall-box mounting with hinged cover, gasket and screw-terminal contacts |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single- or double-pole contacts12 or 24 VDC indicatorsSurface or flush back boxAudible local alarm contact
Planning a Resettable Emergency Door Release Button specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
