Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Limpeza, desinfecção e esterilização da sala limpa
Desinfetante de peróxido de hidrogênio
A ready-to-use 6% hydrogen peroxide disinfectant blended with WFI for low-residue treatment of compatible cleanroom surfaces.
- Nonflammable peroxide chemistry supports large-area treatment where alcohol vapor is undesirable
- Low-residue active decomposes to water and oxygen after application
- Handled capped containers provide controlled bulk supply for cleanroom wiping and mopping
Introdução do produto
Hydrogen Peroxide Disinfectant is a clear, colorless, ready-to-use blend based on 6% hydrogen peroxide and WFI-quality or deionized water. The square-shoulder 5 L natural HDPE container combines an integrated carry handle with a peroxide-compatible threaded closure for measured transfer to a qualified wipe or mop system. A translucent wall allows the remaining volume to be checked without opening the package, while double- or triple-bagged formats can support staged cleanroom entry. The product is intended for compatible hard, nonporous surfaces; visible soil should be removed first, the labeled wet-contact time must be maintained, and a single-active peroxide formulation should not be assumed to provide the same claim set as a dedicated peracetic-acid or enhanced sporicidal product.
Características-chave
WFI-quality or deionized-water blend options
Low nonvolatile residue after peroxide decomposition
Nonflammable liquid with no alcohol vapor contribution
0.2 micron filtered and sterile-fill configurations
Natural semi-translucent HDPE container with visible fill level
Integrated carry handle and tamper-evident threaded closure
Double- or triple-bagged transfer packaging options
Preocupações do produto do cliente
Hydrogen peroxide performance depends on concentration, storage history, surface wetting, and freedom from catalytic contamination. Heat, ultraviolet light, elevated pH, and traces of transition metals can accelerate decomposition and release oxygen. An unsuitable transfer vessel or closure can therefore shorten usable life or allow pressure to build. Peroxide-compatible HDPE packaging, a tamper-evident controlled closure, protected storage, and a defined application volume help preserve the formulation from receipt through use.
Will repeated use leave a visible film?The formulation contains hydrogen peroxide and high-grade water without an alcohol denaturant. After the required wet period, the active decomposes principally to water and oxygen, which limits nonvolatile residue on a properly cleaned compatible surface.
How can concentration loss during storage be controlled?An opaque or natural HDPE primary pack, protected storage temperature, and limited exposure to heat, ultraviolet light, metals, and process soil help slow catalytic breakdown. Supplying the product ready to use also avoids routine dilution and contaminated make-up water.
Could oxygen evolution affect the package?The primary container and closure are selected for dilute peroxide service and include a tamper-evident controlled-vent or sealed dispensing configuration suited to the formulation. The solution should remain in its original package and should not be transferred into an arbitrary hermetically sealed vessel.
Is 6% peroxide compatible with every cleanroom material?Compatibility depends on concentration, contact time, temperature, and substrate. A defined coupon study can establish the method for stainless steel, glass, coatings, elastomers, and polymers before routine use on a critical surface.
Does this product replace a dedicated sporicidal formulation?Not automatically. A 6% single-active hydrogen peroxide product can support routine cleaning or disinfection, but the target organisms and contact time must follow its local label. A separate enhanced peroxide, peracetic-acid blend, or other sporicide may still be required by the contamination-control program.
Aplicações típicas
Routine disinfection of compatible cleanroom floors and wallsWipe-down of isolator and RABS exterior surfacesTreatment of stainless steel worktops and equipment exteriorsMaterial-transfer surface disinfection at controlled-area boundariesLarge-area application where a nonflammable liquid is preferredResidue-sensitive product-contact areas under the applicable procedurePharmaceutical and biotechnology production support spacesMedical-device and laboratory controlled environments
Parâmetros técnicos
A 6% aqueous hydrogen peroxide formulation supplies oxidative activity without the volatile organic content of an alcohol disinfectant. Cleanroom grades are commonly blended with Water for Injection, passed through a 0.2 micron filter, and sterile filled into controlled primary packaging. The clear solution has a typical relative density of 1.020–1.023 at 20 °C and remains water soluble. Its low nonvolatile residue makes it useful where repeated alcohol rinsing would add time or vapor load, while the exact antimicrobial spectrum and wet-contact time remain those stated for the selected market formulation.
| Material principal | 6% w/w hydrogen peroxide blended with 94% Water for Injection or deionized water |
|---|---|
| Painel de espessura | 1.2–2.2 mm nominal wall thickness for the handled HDPE container |
| Largura efetiva | 180–220 mm typical body width for a 5 L rectangular container |
| Comprimento máximo | 280–340 mm typical overall height including the closed screw cap |
| Aço enfrentando espessura | 0 mm; peroxide-compatible polymer packaging without steel facing |
| Densidade Core | 1020–1023 kg/m³ typical solution density at 20 °C |
| Condutividade térmica | Approximately 0.58–0.60 W/(m·K) at 20 °C for the dilute aqueous solution |
| Superfície acabado | Clear, colorless liquid in a smooth natural semi-translucent HDPE container |
| Tipo conjunto | Peroxide-compatible threaded neck with a tamper-evident controlled-vent or sealed dispensing closure |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
3.8–5 L square-shoulder handled capped HDPE container6% hydrogen peroxide blended with WFI-quality water6% hydrogen peroxide blended with deionized water0.2 micron filtered preparationSterile-filled or filtered nonsterile presentationTamper-evident controlled-vent cap or closed transfer connectorDouble- or triple-bagged cleanroom transfer package
Planning a Hydrogen Peroxide Disinfectant specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
