Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamentos de drenagem, higiene e segurança da sala limpa
Z Alarme de concentração de gás
A fixed gas monitor with local concentration display, staged alarms and remote control-system outputs.
- Continuous Concentration Display
- Multi-Level Alarm Relays
- Local Beacon and Sounder
- Remote BMS Interface
Introdução do produto
The gas concentration alarm powers and reads a compatible fixed sensor, displays the measured value and drives configurable warning and alarm outputs. Relay contacts, analog signals or industrial communications connect the device to ventilation, gas shutdown and building monitoring systems. Sensor type and range are selected for the actual gas rather than treated as interchangeable.
Características-chave
Multiple thresholds separate warning, alarm and fault conditions.
Local audible and visual outputs alert personnel at the room entrance.
Remote signals support ventilation and gas-isolation interlocks.
Preocupações do produto do cliente
Gas hazards can be invisible, so personnel and control systems need clear local indication plus dependable remote action.
One detector cannot accurately measure every gas.The sensing technology and range are selected for the target gas and environment.
A local alarm may not reach an unoccupied control room.Relays, analog output or digital communication transmit alarm status remotely.
Sensor drift can hide a developing hazard.Scheduled calibration and fault supervision identify loss of measurement confidence.
Ventilation must respond before a high-level alarm.Separate warning and alarm thresholds stage ventilation and shutdown actions.
Aplicações típicas
Process gas roomsCleanroom utility chasesLaboratory gas cabinetsChemical storage areas
Parâmetros técnicos
Typical transmitter construction is listed below; sensor chemistry, range and setpoints are selected for the target gas.
| Material principal | Powder-coated steel or polymer enclosure with gas-specific sensor electronics |
|---|---|
| Painel de espessura | 1.0-1.5 mm metal enclosure |
| Largura efetiva | 150-350 mm |
| Comprimento máximo | Up to 500 mm enclosure height |
| Aço enfrentando espessura | 1.0-1.5 mm steel enclosure panels |
| Densidade Core | 7850 kg/m³ for steel enclosure parts |
| Condutividade térmica | 45-60 W/(m·K) for steel enclosure components |
| Superfície acabado | Smooth light-gray coating with colored alarm indicators |
| Tipo conjunto | Gasketed enclosure with cable glands and pluggable sensor/relay terminals |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Remote sensor headAnalog and digital outputsBeacon/sounderGas-shutdown relay
Planning a Gas Concentration Alarm specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
