Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Drainage de salle blanche, équipement d'hygiène et de sécurité
Z Alarme de concentration de gaz
A fixed gas monitor with local concentration display, staged alarms and remote control-system outputs.
- Continuous Concentration Display
- Multi-Level Alarm Relays
- Local Beacon and Sounder
- Remote BMS Interface
Introduction de produit
The gas concentration alarm powers and reads a compatible fixed sensor, displays the measured value and drives configurable warning and alarm outputs. Relay contacts, analog signals or industrial communications connect the device to ventilation, gas shutdown and building monitoring systems. Sensor type and range are selected for the actual gas rather than treated as interchangeable.
Key Features
Multiple thresholds separate warning, alarm and fault conditions.
Local audible and visual outputs alert personnel at the room entrance.
Remote signals support ventilation and gas-isolation interlocks.
Préoccupations du client produit
Gas hazards can be invisible, so personnel and control systems need clear local indication plus dependable remote action.
One detector cannot accurately measure every gas.The sensing technology and range are selected for the target gas and environment.
A local alarm may not reach an unoccupied control room.Relays, analog output or digital communication transmit alarm status remotely.
Sensor drift can hide a developing hazard.Scheduled calibration and fault supervision identify loss of measurement confidence.
Ventilation must respond before a high-level alarm.Separate warning and alarm thresholds stage ventilation and shutdown actions.
Les applications typiques
Process gas roomsCleanroom utility chasesLaboratory gas cabinetsChemical storage areas
Paramètres techniques
Typical transmitter construction is listed below; sensor chemistry, range and setpoints are selected for the target gas.
| Matériaux de base | Powder-coated steel or polymer enclosure with gas-specific sensor electronics |
|---|---|
| Panneau épaisseur | 1.0-1.5 mm metal enclosure |
| Largeur effective | 150-350 mm |
| Longueur maximale | Up to 500 mm enclosure height |
| Acier face épaisseur | 1.0-1.5 mm steel enclosure panels |
| Densité Core | 7850 kg/m³ for steel enclosure parts |
| Conductivité thermique | 45-60 W/(m·K) for steel enclosure components |
| surface finie | Smooth light-gray coating with colored alarm indicators |
| Type joint | Gasketed enclosure with cable glands and pluggable sensor/relay terminals |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Remote sensor headAnalog and digital outputsBeacon/sounderGas-shutdown relay
Planning a Gas Concentration Alarm specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
