Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de sala limpa Peças de reposição
Módulo de fonte de alimentação FFU
A compact enclosed electrical module that provides matched, protected power for an FFU motor and its speed-control electronics.
- Matched FFU Output
- Ventilated Metal Enclosure
- Protected Terminal Access
- Compact Retrofit Format
Introdução do produto
The FFU power supply module converts and distributes incoming electrical power to the fan motor and associated control circuit. A perforated folded-metal enclosure protects energized components while allowing heat to leave the compact ceiling-mounted assembly. Separate terminal groups simplify input, motor-output and control wiring, while a replaceable protective device helps isolate electrical faults. Voltage, current capacity, control topology, terminal assignment and mounting dimensions must be matched to the original FFU system.
Características-chave
Separated terminal groups reduce confusion between supply, motor and control connections.
A replaceable fuse or protective device provides localized electrical fault isolation.
Multiple mounting-slot and terminal arrangements support replacement in compact FFU housings.
Preocupações do produto do cliente
A replacement supply must match the FFU electrical load and control architecture without creating excess heat in the shallow plenum.
Incorrect output voltage or current capacity causes unstable fan operation.The module is selected against the original motor rating, starting demand and control circuit load.
Restricted ceiling space allows heat to accumulate around power electronics.A perforated enclosure and component spacing provide a defined natural-convection path.
Unclear field terminals lead to input and motor wiring errors.Physically separated pluggable or screw-terminal groups support orderly circuit identification.
A module with different mounting points cannot be secured inside the FFU.Enclosure footprint, slot spacing and terminal orientation can be matched to the existing control box.
Aplicações típicas
Cleanroom fan filter unitsLaminar-flow ceiling modulesFFU control-box refurbishmentMini-environment air modules
Parâmetros técnicos
Typical construction ranges for enclosed FFU power supply modules are shown below.
| Material principal | FR-4 power-control board with copper conductors, transformer or switched-mode components |
|---|---|
| Painel de espessura | 45-100 mm nominal enclosure depth |
| Largura efetiva | 100-220 mm nominal enclosure width |
| Comprimento máximo | Up to 320 mm overall enclosure length |
| Aço enfrentando espessura | 0.8-1.2 mm galvanized or coated steel enclosure |
| Densidade Core | 1850-2000 kg/m³ for FR-4 circuit-board substrate |
| Condutividade térmica | 0.25-0.40 W/(m·K) through typical FR-4 substrate |
| Superfície acabado | Natural zinc-coated silver enclosure with green pluggable or screw terminals |
| Tipo conjunto | Folded ventilated cover with screw fastening, mounting slots and terminal-block connections |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Matched AC input and motor outputEC-fan control supplyPluggable or fixed screw terminalsCustom enclosure and mounting slots
Planning a FFU Power Supply Module specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
