English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Запчасти для оборудования для чистых помещений
Модуль питания FFU
A compact enclosed electrical module that provides matched, protected power for an FFU motor and its speed-control electronics.
- Matched FFU Output
- Ventilated Metal Enclosure
- Protected Terminal Access
- Compact Retrofit Format
Введение продукции
The FFU power supply module converts and distributes incoming electrical power to the fan motor and associated control circuit. A perforated folded-metal enclosure protects energized components while allowing heat to leave the compact ceiling-mounted assembly. Separate terminal groups simplify input, motor-output and control wiring, while a replaceable protective device helps isolate electrical faults. Voltage, current capacity, control topology, terminal assignment and mounting dimensions must be matched to the original FFU system.
Основные характеристики
Separated terminal groups reduce confusion between supply, motor and control connections.
A replaceable fuse or protective device provides localized electrical fault isolation.
Multiple mounting-slot and terminal arrangements support replacement in compact FFU housings.
Обеспокоенность клиентов продуктами
A replacement supply must match the FFU electrical load and control architecture without creating excess heat in the shallow plenum.
Incorrect output voltage or current capacity causes unstable fan operation.The module is selected against the original motor rating, starting demand and control circuit load.
Restricted ceiling space allows heat to accumulate around power electronics.A perforated enclosure and component spacing provide a defined natural-convection path.
Unclear field terminals lead to input and motor wiring errors.Physically separated pluggable or screw-terminal groups support orderly circuit identification.
A module with different mounting points cannot be secured inside the FFU.Enclosure footprint, slot spacing and terminal orientation can be matched to the existing control box.
Типичные приложения
Cleanroom fan filter unitsLaminar-flow ceiling modulesFFU control-box refurbishmentMini-environment air modules
Технические параметры
Typical construction ranges for enclosed FFU power supply modules are shown below.
| Основной материал | FR-4 power-control board with copper conductors, transformer or switched-mode components |
|---|---|
| Толщина панели | 45-100 mm nominal enclosure depth |
| эффективная ширина | 100-220 mm nominal enclosure width |
| Максимальная длина | Up to 320 mm overall enclosure length |
| Толщина линий стали | 0.8-1.2 mm galvanized or coated steel enclosure |
| Плотность ядра | 1850-2000 kg/m³ for FR-4 circuit-board substrate |
| Теплопроводимость | 0.25-0.40 W/(m·K) through typical FR-4 substrate |
| Поверхностная отделка | Natural zinc-coated silver enclosure with green pluggable or screw terminals |
| Объединенный тип | Folded ventilated cover with screw fastening, mounting slots and terminal-block connections |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Matched AC input and motor outputEC-fan control supplyPluggable or fixed screw terminalsCustom enclosure and mounting slots
Planning a FFU Power Supply Module specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
