Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Controle de sala limpa e sistemas de monitoramento ambiental
Pressão diferencial digital
A digital wall gauge that presents low differential pressure in clear engineering units and adds programmable alarm, relay and communication functions.
- High-Visibility Numeric Display
- Programmable Alarm Limits
- Multiple Pressure Units
- Relay and Analog Outputs
Introdução do produto
The digital differential pressure gauge integrates a low-range sensor, bright numeric display and local alarm logic in one wall-mounted device. Users can select pressure units and view signed room-to-reference differential without converting an analog scale. Programmable high and low limits drive color change, buzzer or relays, while analog and digital outputs share the measured value with monitoring systems. A flush or surface mounting arrangement allows the display to remain readable at entrances and service corridors.
Características-chave
Selectable pressure units support Pa and other commonly used engineering scales.
Independent high and low thresholds drive local color and remote relay alarms.
Analog or network retransmission avoids installing a second room pressure sensor.
Preocupações do produto do cliente
Room users need an unambiguous pressure value and alarm state without interpreting a small pointer scale.
A small analog scale is difficult to read from the corridor.Large backlit digits present the signed pressure value at a glance.
Staff misinterpret different pressure units used across rooms.A selectable and clearly displayed unit keeps each reading explicit.
The gauge shows pressure but cannot trigger a remote alarm.Programmable relays and analog output send the same condition to the monitoring system.
A brief door opening leaves the display in alarm long after closure.Adjustable delay and hysteresis distinguish transient doorway disturbances from sustained loss.
Aplicações típicas
Cleanroom entrance pressure displayAirlock status indicationIsolation room monitoringFilter differential indication
Parâmetros técnicos
Typical materials and dimensions for a digital cleanroom differential pressure gauge are listed below.
| Material principal | Silicon MEMS sensor with white polycarbonate bezel, tempered display lens and FR-4 electronics |
|---|---|
| Painel de espessura | 45-90 mm gauge depth |
| Largura efetiva | 120-200 mm front bezel width |
| Comprimento máximo | Up to 240 mm bezel height |
| Aço enfrentando espessura | 0-1.0 mm; optional stainless rear mounting plate |
| Densidade Core | 1180-1220 kg/m³ for polycarbonate bezel components |
| Condutividade térmica | 0.19-0.22 W/(m·K) for polycarbonate housing material |
| Superfície acabado | Smooth white bezel with black glass display window and green-red status backlight |
| Tipo conjunto | Flush or surface wall mount with rear pressure ports and removable power-signal terminal |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Surface or flush mountingGreen-red status backlightRelay and analog outputsBACnet or Modbus communication
Planning a Digital Differential Pressure Gauge specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
