English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы контроля за чистыми помещениями и экологического мониторинга
Цифровой дифференциальный манометр
A digital wall gauge that presents low differential pressure in clear engineering units and adds programmable alarm, relay and communication functions.
- High-Visibility Numeric Display
- Programmable Alarm Limits
- Multiple Pressure Units
- Relay and Analog Outputs
Введение продукции
The digital differential pressure gauge integrates a low-range sensor, bright numeric display and local alarm logic in one wall-mounted device. Users can select pressure units and view signed room-to-reference differential without converting an analog scale. Programmable high and low limits drive color change, buzzer or relays, while analog and digital outputs share the measured value with monitoring systems. A flush or surface mounting arrangement allows the display to remain readable at entrances and service corridors.
Основные характеристики
Selectable pressure units support Pa and other commonly used engineering scales.
Independent high and low thresholds drive local color and remote relay alarms.
Analog or network retransmission avoids installing a second room pressure sensor.
Обеспокоенность клиентов продуктами
Room users need an unambiguous pressure value and alarm state without interpreting a small pointer scale.
A small analog scale is difficult to read from the corridor.Large backlit digits present the signed pressure value at a glance.
Staff misinterpret different pressure units used across rooms.A selectable and clearly displayed unit keeps each reading explicit.
The gauge shows pressure but cannot trigger a remote alarm.Programmable relays and analog output send the same condition to the monitoring system.
A brief door opening leaves the display in alarm long after closure.Adjustable delay and hysteresis distinguish transient doorway disturbances from sustained loss.
Типичные приложения
Cleanroom entrance pressure displayAirlock status indicationIsolation room monitoringFilter differential indication
Технические параметры
Typical materials and dimensions for a digital cleanroom differential pressure gauge are listed below.
| Основной материал | Silicon MEMS sensor with white polycarbonate bezel, tempered display lens and FR-4 electronics |
|---|---|
| Толщина панели | 45-90 mm gauge depth |
| эффективная ширина | 120-200 mm front bezel width |
| Максимальная длина | Up to 240 mm bezel height |
| Толщина линий стали | 0-1.0 mm; optional stainless rear mounting plate |
| Плотность ядра | 1180-1220 kg/m³ for polycarbonate bezel components |
| Теплопроводимость | 0.19-0.22 W/(m·K) for polycarbonate housing material |
| Поверхностная отделка | Smooth white bezel with black glass display window and green-red status backlight |
| Объединенный тип | Flush or surface wall mount with rear pressure ports and removable power-signal terminal |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Surface or flush mountingGreen-red status backlightRelay and analog outputsBACnet or Modbus communication
Planning a Digital Differential Pressure Gauge specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
