Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Distribuição de Ar para Sala Limpa
Z Volume de ar constante caixa terminal
A single-duct terminal that measures primary airflow and positions an internal damper to maintain a fixed supply or extract volume as upstream pressure changes.
- Pressure-Independent Air Volume
- Integrated Flow Pickup
- Low-Leakage Damper
- Accessible Control Enclosure
Introdução do produto
The constant air volume terminal box provides a defined air quantity to a cleanroom branch without requiring the main duct pressure to remain perfectly steady. A multi-point inlet sensor reads velocity pressure across the round connection, while a calibrated controller drives the internal damper to the scheduled setpoint. The rectangular galvanized-steel casing transitions directly to downstream ductwork and keeps the actuator, tubing and controller outside the primary airstream for inspection. Optional acoustic lining and discharge attenuator sections can control breakout and regenerated sound in ceiling voids.
Características-chave
Closed-loop damper control maintains the selected air quantity through normal variations in system static pressure.
The external control enclosure leaves the actuator and pressure tubing reachable without opening the supply duct.
A rectangular slip-and-drive discharge connection simplifies transition to branch ductwork or a downstream reheat section.
Preocupações do produto do cliente
A constant-volume branch must hold its scheduled flow despite filter loading and upstream pressure movement while remaining quiet and serviceable above the ceiling.
Branch airflow rises whenever the main supply fan increases static pressure.The flow sensor and modulating damper continuously correct the terminal opening to retain the programmed volume.
A poorly selected inlet size produces unstable readings at low cleanroom airflow.Multiple inlet diameters and calibrated pickup factors allow the sensor velocity to stay within a useful control range.
Damper-generated noise travels directly to a ceiling diffuser.A lined casing or downstream attenuator section absorbs regenerated sound before the branch enters the occupied space.
Controls cannot be inspected after adjacent ceiling services are installed.A side-mounted removable enclosure groups the actuator, controller and tubing in one visible service location.
Aplicações típicas
Constant supply airflow to clean production roomsFixed extract volume from pressure-controlled support spacesGowning-room ventilation branchesLaboratory make-up air terminalsMedical-device assembly HVAC zones
Parâmetros técnicos
Representative construction ranges for a single-duct cleanroom constant-volume terminal are shown below.
| Material principal | Galvanized-steel casing with steel damper blade, aluminum flow pickup and external control assembly |
|---|---|
| Painel de espessura | 0.8–1.2 mm galvanized casing panels |
| Largura efetiva | 200–800 mm rectangular discharge width |
| Comprimento máximo | Up to 1200 mm including optional attenuator or reheat section |
| Aço enfrentando espessura | 0.8–1.2 mm galvanized sheet-steel casing |
| Densidade Core | Approximately 7850 kg/m³ for the steel casing and damper components |
| Condutividade térmica | Approximately 45–60 W/(m·K) for the steel casing and damper components |
| Superfície acabado | Clean mill-galvanized casing with optional white powder-coated exterior |
| Tipo conjunto | Round beaded inlet collar and rectangular slip-and-drive discharge connection |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Pressure-independent digital or analog controlsFactory-set constant-volume mechanical controlInternal acoustic liner or integral silencerHot-water or electric reheat section
Planning a Constant Air Volume Terminal Box specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
