Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de sala limpa Peças de reposição
Z Módulo de voz do chuveiro de ar
A compact voice and tone module that provides clear audible instructions and cycle feedback inside a cleanroom air shower.
- Clear Audible Prompts
- Compact Speaker Enclosure
- Controller Signal Input
- Visible Status Indicators
Introdução do produto
The air shower voice module converts controller signals into spoken prompts or tones that guide personnel through entry, door and purge stages. Its enclosed speaker and perforated grille provide local sound without requiring a separate external amplifier enclosure. Colored indicators support basic service checks, while the pluggable terminal simplifies low-voltage wiring. Replacement selection should match supply voltage, trigger method, prompt sequence, required language and mounting space.
Características-chave
The integrated speaker and protective grille form a compact self-contained unit.
Separate green and red indicators provide visible operating feedback.
A two-position pluggable terminal supports straightforward controller connection.
Preocupações do produto do cliente
Audible guidance must remain understandable over blower noise and respond correctly to the installed controller sequence.
Users open a door too early because the shower stage is unclear.Timed spoken prompts identify entry, purge and exit stages.
Low output is masked by blower and nozzle noise.The speaker format and enclosure are selected for intelligible local announcements.
An incompatible trigger signal causes incorrect or repeated messages.The module input is configured to match the controller output logic.
Fixed-language prompts are unsuitable for different facilities.Message language and sequence can be configured for the intended users.
Aplicações típicas
Personnel air shower instructionsCleanroom entry sequence guidanceMaterial air shower audible alertsAir shower control-system refurbishment
Parâmetros técnicos
Typical construction and dimensional ranges for compact air shower voice modules are shown below.
| Material principal | ABS enclosure with dynamic speaker, voice playback circuit and status LEDs |
|---|---|
| Painel de espessura | 35-75 mm nominal module depth |
| Largura efetiva | 80-160 mm nominal enclosure width |
| Comprimento máximo | Up to 200 mm overall enclosure height |
| Aço enfrentando espessura | 0.8-1.2 mm optional internal speaker support plate |
| Densidade Core | 1030-1200 kg/m³ for ABS enclosure material |
| Condutividade térmica | 0.17-0.25 W/(m·K) for ABS enclosure material |
| Superfície acabado | Matte dark-gray enclosure with black grille and green/red indicators |
| Tipo conjunto | Four-screw enclosure cover with integrated grille and pluggable terminal connection |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Alternative prompt languagesCustom message sequenceMatched trigger voltageTone-only or voice-and-tone operation
Planning a Air Shower Voice Module specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
