Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia piezas de repuesto
Módulo de voz Air Shower
A compact voice and tone module that provides clear audible instructions and cycle feedback inside a cleanroom air shower.
- Clear Audible Prompts
- Compact Speaker Enclosure
- Controller Signal Input
- Visible Status Indicators
Introducción del producto
The air shower voice module converts controller signals into spoken prompts or tones that guide personnel through entry, door and purge stages. Its enclosed speaker and perforated grille provide local sound without requiring a separate external amplifier enclosure. Colored indicators support basic service checks, while the pluggable terminal simplifies low-voltage wiring. Replacement selection should match supply voltage, trigger method, prompt sequence, required language and mounting space.
Características clave
The integrated speaker and protective grille form a compact self-contained unit.
Separate green and red indicators provide visible operating feedback.
A two-position pluggable terminal supports straightforward controller connection.
Preocupaciones del producto del cliente
Audible guidance must remain understandable over blower noise and respond correctly to the installed controller sequence.
Users open a door too early because the shower stage is unclear.Timed spoken prompts identify entry, purge and exit stages.
Low output is masked by blower and nozzle noise.The speaker format and enclosure are selected for intelligible local announcements.
An incompatible trigger signal causes incorrect or repeated messages.The module input is configured to match the controller output logic.
Fixed-language prompts are unsuitable for different facilities.Message language and sequence can be configured for the intended users.
Aplicaciones típicas
Personnel air shower instructionsCleanroom entry sequence guidanceMaterial air shower audible alertsAir shower control-system refurbishment
Parámetros técnicos
Typical construction and dimensional ranges for compact air shower voice modules are shown below.
| Materiales Core | ABS enclosure with dynamic speaker, voice playback circuit and status LEDs |
|---|---|
| Panel de espesor | 35-75 mm nominal module depth |
| Ancho efectivo | 80-160 mm nominal enclosure width |
| Longitud máxima | Up to 200 mm overall enclosure height |
| Acero frente a espesor | 0.8-1.2 mm optional internal speaker support plate |
| Densidad Core | 1030-1200 kg/m³ for ABS enclosure material |
| Conductividad térmica | 0.17-0.25 W/(m·K) for ABS enclosure material |
| Superficie acabada | Matte dark-gray enclosure with black grille and green/red indicators |
| Tipo conjunto | Four-screw enclosure cover with integrated grille and pluggable terminal connection |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Alternative prompt languagesCustom message sequenceMatched trigger voltageTone-only or voice-and-tone operation
Planning a Air Shower Voice Module specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
