Cleanroom call system station with large red sealed button and confirmation light

클린룸 조명 및 전기 장비

클린룸 콜 시스템

A supervised call-and-confirmation system that lets cleanroom personnel request assistance through large sealed wall buttons.

Large Sealed Call Button
Visible Call Confirmation
Supervised Control Circuit
Remote Acknowledge and Reset

견적 요청 제품 찾아보기

상품 소개

The cleanroom call system connects flush wall call points to corridor indicators, an operator annunciator or a network server. A large colored membrane or stainless push button registers the request and illuminates to confirm it was received. Separate acknowledge and reset logic prevents a call from disappearing silently, while supervised wiring reports open-circuit or device faults.

주요 기능

The broad call control can be operated through double gloves.

A colored illuminated ring confirms that the system recorded the request.

Supervised wiring distinguishes a real call from a broken connection.

Remote annunciation identifies the originating room or call point.

Defined acknowledge and reset stages keep active requests visible until handled.

고객 제품 관심사

A simple push button is insufficient when users need confirmation, room identification and assurance that a broken wire has not disabled the call path.

A small button is hard to locate and press through gloves.A large high-contrast sealed actuator provides an obvious tactile target.

The caller cannot tell whether the signal reached an operator.A local light and optional tone confirm registration immediately.

A cable fault looks the same as a quiet inactive system.Supervised inputs raise a distinct trouble condition for open or short circuits.

Calls are cleared before assistance actually arrives.Separate acknowledge and local reset steps preserve the request workflow.

일반적인 응용 프로그램

Cleanroom assistance requestsGowning room support callsLaboratory emergency pointsMaterial airlock pickup calls

기술 매개변수

Typical configurable construction ranges for a cleanroom call system are listed below.

핵심 재료	Stainless flush plates with sealed call/reset controls, LED indicators, supervised controller and low-voltage wiring
패널 두께	1.5-3.0 mm cleanroom call-point plate thickness
유효 폭	86-240 mm call-station face width
최대 길이	Up to 320 mm overall station height
강철 면면 두께	1.5-3.0 mm SUS304/SUS316L front plate
코어 밀도	Approximately 7900-8000 kg/m³ for the stainless call-point plate
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for the stainless front plate
표면 마무리	Fine-brushed stainless with red, blue, green or amber illuminated sealed buttons
접합 유형	Flush gasketed wall plate with sealed actuators and supervised rear controller terminal connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Call, reset and emergency functionsSingle-room or networked annunciationAudible and visual confirmationPull-cord or wall-button input

Planning a Cleanroom Call System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.