Stainless steel cleanroom floor movement joint with perforated anchoring wings

Cleanroom Flooring Sistem

Stainless Steel Cleanroom Lantai Gerakan Bersama

A flush AISI 304 stainless steel movement profile that protects adjacent floor edges while accommodating controlled expansion and compression at substrate joints.

Controlled Joint Movement
Permukaan Flush Hygienic
Protected Flooring Edges
2.5 m Modular Length

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The stainless steel cleanroom floor movement joint is aligned directly above a structural or screed movement line. Perforated anchoring legs are bedded beneath the adjacent floor finish, leaving a narrow compression zone flush with the walking surface. The AISI 304 stainless steel edges shield brittle floor margins from cart wheels and concentrated point contact while the central geometry accepts repeated lateral movement. Several installed depths allow the same visible joint concept to coordinate with different tile or resin build-ups.

Fitur utama:

A narrow flush surface reduces wheel impact compared with raised cover plates or recessed sealant beads.

Perforated stainless steel anchoring legs transfer traffic loads into the surrounding adhesive bed.

The central compression zone absorbs lateral expansion and contraction without pressing directly on finished floor edges.

Multiple profile depths align the top surface with thin coatings, terrazzo or thicker modular floor finishes.

Kekhawatiran produk pelanggan

A necessary substrate joint must continue through the finish without becoming an impact point, an unprotected edge or a difficult-to-clean recess.

Rigid flooring cracks when a structural movement line is bridged with resin or tile.The joint profile is positioned over the substrate break so the surface can expand and compress in the same location.

Forks, casters and carts chip exposed edges on both sides of a soft sealant joint.Stainless steel edge rails receive the direct rolling contact and protect the adjacent finish.

A proud metal cover creates noise and vibration as small wheels cross it.The profile is installed approximately flush with the surrounding finished floor.

Deep open gaps collect debris and are difficult to wipe during routine sanitation.The narrow central movement zone closes the visible line while retaining lateral movement capacity.

Aplikasi yang Tipis

Pharmaceutical cleanroom movement linesKoridor Rumah Sakit yang DikendalikanLaboratory floor transitionsMaterial airlocks with cart trafficHygienic production floor fields

Parameter teknis

Representative dimensions and material data for a heavy-duty stainless steel floor compression joint are provided below.

Bahan inti	AISI 304 stainless steel anchoring profile with an integral compression movement zone
Ketebalan Panel (Panel Thickness)	8.0–22.5 mm installed profile depth to suit the adjoining floor build-up
Efektif lebar	Approximately 48 mm overall anchored width with an 8 mm central zone
Panjang maksimum	2500 mm standard profile length
Baja menghadap ketebalan	Approximately 1.0 mm stainless steel profile thickness
Kepadatan inti (core density)	Approximately 7900 kg/m³ for AISI 304 stainless steel
Konduktivitas Termal (Thermal Conductivity)	Approximately 14–17 W/(m·K) for AISI 304 stainless steel
Permukaan selesai	Smooth BA or satin stainless steel edges with a narrow flush movement line
Jenis Bersama	Two-wing mechanically anchored compression profile aligned above the substrate movement joint
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

8, 10, 12, 15 or 22.5 mm profile depthAISI 304 or 316L stainless steelBA, satin or brushed exposed finishInternal, perimeter and cross-junction pieces

Planning a Stainless Steel Cleanroom Floor Movement Joint specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami