Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom Flooring Systems
Acier inoxydable mouvement de sol de salle blanche
A flush AISI 304 stainless steel movement profile that protects adjacent floor edges while accommodating controlled expansion and compression at substrate joints.
- Controlled Joint Movement
- Flush Hygienic Surface
- Protected Flooring Edges
- 2.5 m Modular Length
Introduction de produit
The stainless steel cleanroom floor movement joint is aligned directly above a structural or screed movement line. Perforated anchoring legs are bedded beneath the adjacent floor finish, leaving a narrow compression zone flush with the walking surface. The AISI 304 stainless steel edges shield brittle floor margins from cart wheels and concentrated point contact while the central geometry accepts repeated lateral movement. Several installed depths allow the same visible joint concept to coordinate with different tile or resin build-ups.
Key Features
Perforated stainless steel anchoring legs transfer traffic loads into the surrounding adhesive bed.
The central compression zone absorbs lateral expansion and contraction without pressing directly on finished floor edges.
Multiple profile depths align the top surface with thin coatings, terrazzo or thicker modular floor finishes.
Préoccupations du client produit
A necessary substrate joint must continue through the finish without becoming an impact point, an unprotected edge or a difficult-to-clean recess.
Rigid flooring cracks when a structural movement line is bridged with resin or tile.The joint profile is positioned over the substrate break so the surface can expand and compress in the same location.
Forks, casters and carts chip exposed edges on both sides of a soft sealant joint.Stainless steel edge rails receive the direct rolling contact and protect the adjacent finish.
A proud metal cover creates noise and vibration as small wheels cross it.The profile is installed approximately flush with the surrounding finished floor.
Deep open gaps collect debris and are difficult to wipe during routine sanitation.The narrow central movement zone closes the visible line while retaining lateral movement capacity.
Les applications typiques
Pharmaceutical cleanroom movement linesHospital controlled corridorsLaboratory floor transitionsMaterial airlocks with cart trafficHygienic production floor fields
Paramètres techniques
Representative dimensions and material data for a heavy-duty stainless steel floor compression joint are provided below.
| Matériaux de base | AISI 304 stainless steel anchoring profile with an integral compression movement zone |
|---|---|
| Panneau épaisseur | 8.0–22.5 mm installed profile depth to suit the adjoining floor build-up |
| Largeur effective | Approximately 48 mm overall anchored width with an 8 mm central zone |
| Longueur maximale | 2500 mm standard profile length |
| Acier face épaisseur | Approximately 1.0 mm stainless steel profile thickness |
| Densité Core | Approximately 7900 kg/m³ for AISI 304 stainless steel |
| Conductivité thermique | Approximately 14–17 W/(m·K) for AISI 304 stainless steel |
| surface finie | Smooth BA or satin stainless steel edges with a narrow flush movement line |
| Type joint | Two-wing mechanically anchored compression profile aligned above the substrate movement joint |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
8, 10, 12, 15 or 22.5 mm profile depthAISI 304 or 316L stainless steelBA, satin or brushed exposed finishInternal, perimeter and cross-junction pieces
Planning a Stainless Steel Cleanroom Floor Movement Joint specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
