Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Flooring Systemen
Edelstahl Reinraum Bodenbewegung Joint
A flush AISI 304 stainless steel movement profile that protects adjacent floor edges while accommodating controlled expansion and compression at substrate joints.
- Controlled Joint Movement
- Flush Hygienic Surface
- Protected Flooring Edges
- 2.5 m Modular Length
Produkteinführung
The stainless steel cleanroom floor movement joint is aligned directly above a structural or screed movement line. Perforated anchoring legs are bedded beneath the adjacent floor finish, leaving a narrow compression zone flush with the walking surface. The AISI 304 stainless steel edges shield brittle floor margins from cart wheels and concentrated point contact while the central geometry accepts repeated lateral movement. Several installed depths allow the same visible joint concept to coordinate with different tile or resin build-ups.
Key Features
Perforated stainless steel anchoring legs transfer traffic loads into the surrounding adhesive bed.
The central compression zone absorbs lateral expansion and contraction without pressing directly on finished floor edges.
Multiple profile depths align the top surface with thin coatings, terrazzo or thicker modular floor finishes.
Kunden Produktbedenken
A necessary substrate joint must continue through the finish without becoming an impact point, an unprotected edge or a difficult-to-clean recess.
Rigid flooring cracks when a structural movement line is bridged with resin or tile.The joint profile is positioned over the substrate break so the surface can expand and compress in the same location.
Forks, casters and carts chip exposed edges on both sides of a soft sealant joint.Stainless steel edge rails receive the direct rolling contact and protect the adjacent finish.
A proud metal cover creates noise and vibration as small wheels cross it.The profile is installed approximately flush with the surrounding finished floor.
Deep open gaps collect debris and are difficult to wipe during routine sanitation.The narrow central movement zone closes the visible line while retaining lateral movement capacity.
Typische Anwendungen
Pharmaceutical cleanroom movement linesKrankenhaus-Kontrollierte KorridoreLaboratory floor transitionsMaterial airlocks with cart trafficHygienic production floor fields
Technische Parameter
Representative dimensions and material data for a heavy-duty stainless steel floor compression joint are provided below.
| Core Material | AISI 304 stainless steel anchoring profile with an integral compression movement zone |
|---|---|
| Panel Dicke | 8.0–22.5 mm installed profile depth to suit the adjoining floor build-up |
| Effektive Breite | Approximately 48 mm overall anchored width with an 8 mm central zone |
| Maximale Länge | 2500 mm standard profile length |
| Stahl facing Dicke | Approximately 1.0 mm stainless steel profile thickness |
| Kerndichte | Approximately 7900 kg/m³ for AISI 304 stainless steel |
| Thermische Leitfähigkeit | Approximately 14–17 W/(m·K) for AISI 304 stainless steel |
| Oberfläche Finish | Smooth BA or satin stainless steel edges with a narrow flush movement line |
| Gemeinsamer Typ | Two-wing mechanically anchored compression profile aligned above the substrate movement joint |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
8, 10, 12, 15 or 22.5 mm profile depthAISI 304 or 316L stainless steelBA, satin or brushed exposed finishInternal, perimeter and cross-junction pieces
Planning a Stainless Steel Cleanroom Floor Movement Joint specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
