Stainless steel cleanroom floor movement joint with perforated anchoring wings

クリーンルームフロアシステム

ステンレス鋼のクリーンルームの床の動きのジョイント

A flush AISI 304 stainless steel movement profile that protects adjacent floor edges while accommodating controlled expansion and compression at substrate joints.

Controlled Joint Movement
Flush の衛生的な表面
Protected Flooring Edges
2.5 m Modular Length

見積もりリクエスト製品案内

商品紹介

The stainless steel cleanroom floor movement joint is aligned directly above a structural or screed movement line. Perforated anchoring legs are bedded beneath the adjacent floor finish, leaving a narrow compression zone flush with the walking surface. The AISI 304 stainless steel edges shield brittle floor margins from cart wheels and concentrated point contact while the central geometry accepts repeated lateral movement. Several installed depths allow the same visible joint concept to coordinate with different tile or resin build-ups.

主要な特徴

A narrow flush surface reduces wheel impact compared with raised cover plates or recessed sealant beads.

Perforated stainless steel anchoring legs transfer traffic loads into the surrounding adhesive bed.

The central compression zone absorbs lateral expansion and contraction without pressing directly on finished floor edges.

Multiple profile depths align the top surface with thin coatings, terrazzo or thicker modular floor finishes.

お客様の製品に関する懸念事項

A necessary substrate joint must continue through the finish without becoming an impact point, an unprotected edge or a difficult-to-clean recess.

Rigid flooring cracks when a structural movement line is bridged with resin or tile.The joint profile is positioned over the substrate break so the surface can expand and compress in the same location.

Forks, casters and carts chip exposed edges on both sides of a soft sealant joint.Stainless steel edge rails receive the direct rolling contact and protect the adjacent finish.

A proud metal cover creates noise and vibration as small wheels cross it.The profile is installed approximately flush with the surrounding finished floor.

Deep open gaps collect debris and are difficult to wipe during routine sanitation.The narrow central movement zone closes the visible line while retaining lateral movement capacity.

典型的な用途

Pharmaceutical cleanroom movement lines病院管理廊下Laboratory floor transitionsMaterial airlocks with cart trafficHygienic production floor fields

技術的なパラメータ

Representative dimensions and material data for a heavy-duty stainless steel floor compression joint are provided below.

コア材料	AISI 304 stainless steel anchoring profile with an integral compression movement zone
パネルの厚さ	8.0–22.5 mm installed profile depth to suit the adjoining floor build-up
有効幅	Approximately 48 mm overall anchored width with an 8 mm central zone
最大長さ	2500 mm standard profile length
鋼鉄の厚さを直面する	Approximately 1.0 mm stainless steel profile thickness
コア密度	Approximately 7900 kg/m³ for AISI 304 stainless steel
熱伝導率	Approximately 14–17 W/(m·K) for AISI 304 stainless steel
表面仕上げ	Smooth BA or satin stainless steel edges with a narrow flush movement line
ジョイントタイプ	Two-wing mechanically anchored compression profile aligned above the substrate movement joint
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

8, 10, 12, 15 or 22.5 mm profile depthAISI 304 or 316L stainless steelBA, satin or brushed exposed finishInternal, perimeter and cross-junction pieces

Planning a Stainless Steel Cleanroom Floor Movement Joint specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する