Stainless steel cleanroom floor movement joint with perforated anchoring wings

클린룸 바닥 시스템

스테인레스 스틸 클린룸 바닥 이동 조인트

A flush AISI 304 stainless steel movement profile that protects adjacent floor edges while accommodating controlled expansion and compression at substrate joints.

Controlled Joint Movement
Flush Hygienic 표면
Protected Flooring Edges
2.5 m Modular Length

견적 요청 제품 찾아보기

상품 소개

The stainless steel cleanroom floor movement joint is aligned directly above a structural or screed movement line. Perforated anchoring legs are bedded beneath the adjacent floor finish, leaving a narrow compression zone flush with the walking surface. The AISI 304 stainless steel edges shield brittle floor margins from cart wheels and concentrated point contact while the central geometry accepts repeated lateral movement. Several installed depths allow the same visible joint concept to coordinate with different tile or resin build-ups.

주요 기능

A narrow flush surface reduces wheel impact compared with raised cover plates or recessed sealant beads.

Perforated stainless steel anchoring legs transfer traffic loads into the surrounding adhesive bed.

The central compression zone absorbs lateral expansion and contraction without pressing directly on finished floor edges.

Multiple profile depths align the top surface with thin coatings, terrazzo or thicker modular floor finishes.

고객 제품 관심사

A necessary substrate joint must continue through the finish without becoming an impact point, an unprotected edge or a difficult-to-clean recess.

Rigid flooring cracks when a structural movement line is bridged with resin or tile.The joint profile is positioned over the substrate break so the surface can expand and compress in the same location.

Forks, casters and carts chip exposed edges on both sides of a soft sealant joint.Stainless steel edge rails receive the direct rolling contact and protect the adjacent finish.

A proud metal cover creates noise and vibration as small wheels cross it.The profile is installed approximately flush with the surrounding finished floor.

Deep open gaps collect debris and are difficult to wipe during routine sanitation.The narrow central movement zone closes the visible line while retaining lateral movement capacity.

일반적인 응용 프로그램

Pharmaceutical cleanroom movement lines병원 통제 복도Laboratory floor transitionsMaterial airlocks with cart trafficHygienic production floor fields

기술 매개변수

Representative dimensions and material data for a heavy-duty stainless steel floor compression joint are provided below.

핵심 재료	AISI 304 stainless steel anchoring profile with an integral compression movement zone
패널 두께	8.0–22.5 mm installed profile depth to suit the adjoining floor build-up
유효 폭	Approximately 48 mm overall anchored width with an 8 mm central zone
최대 길이	2500 mm standard profile length
강철 면면 두께	Approximately 1.0 mm stainless steel profile thickness
코어 밀도	Approximately 7900 kg/m³ for AISI 304 stainless steel
열전도도 (Thermal Conductivity)	Approximately 14–17 W/(m·K) for AISI 304 stainless steel
표면 마무리	Smooth BA or satin stainless steel edges with a narrow flush movement line
접합 유형	Two-wing mechanically anchored compression profile aligned above the substrate movement joint
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

8, 10, 12, 15 or 22.5 mm profile depthAISI 304 or 316L stainless steelBA, satin or brushed exposed finishInternal, perimeter and cross-junction pieces

Planning a Stainless Steel Cleanroom Floor Movement Joint specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.