Silver cleanroom shielding bag in complete three-quarter view

Garmen Cleanroom, PPE dan Consumables

Cleanroom Shielding Bag Bag

Silver metalized cleanroom shielding bag with dissipative polymer surfaces and a heat-sealable multilayer barrier for sensitive electronic components.

Metalized multilayer laminate for electrostatic discharge shielding
Dissipative inner and outer surfaces support controlled handling
Heat-sealable silver barrier pouch for sensitive electronics

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Cleanroom Shielding Bag combines a durable polyester outer layer, a thin aluminum shielding layer and a heat-sealable dissipative polyethylene inner layer. The metalized construction reduces electric-field penetration while the polymer surfaces permit controlled charge dissipation. Its opaque silver barrier also limits moisture and light exposure during dry-pack storage.

Fitur utama:

Continuous metal layer creates a protective shielding envelope

Dissipative surfaces reduce uncontrolled charge concentration

Polyester outer face improves puncture and scuff resistance

Polyethylene inner face supports airtight heat sealing

Clean conversion and double packaging aid controlled-area transfer

Kekhawatiran produk pelanggan

Sensitive devices may be damaged by electrostatic discharge, moisture ingress or punctured packaging. Shielding depends on an intact conductive envelope and a complete seal around the packed component.

Pinholes or folds can interrupt the barrier and reduce protection.Inspect the pouch surface and avoid severe creasing before use.

Contaminated seal areas can form leak channels.Keep the seal zone flat and qualify the sealing cycle.

Sharp leads may puncture the laminate from inside.Use lead protection or rigid trays for pointed components.

An ungrounded operator can introduce charge during packing.Handle the bag within the approved grounded ESD-control process.

Aplikasi yang Tipis

For dry packing and protected transfer of PCBs, integrated circuits, sensors, semiconductor modules, precision electronic assemblies and moisture-sensitive devices.

Parameter teknis

These conservative ranges describe a metalized dissipative cleanroom pouch. Final thickness, barrier grade, dimensions and seal settings should match the device sensitivity and storage interval.

Bahan inti	Dissipative polyester, aluminum shielding layer and heat-sealable dissipative polyethylene
Ketebalan Panel (Panel Thickness)	0.09-0.18 mm laminate thickness
Efektif lebar	100-900 mm bag width
Panjang maksimum	1200 mm bag length
Baja menghadap ketebalan	0 mm; aluminum metalization is used instead of steel
Kepadatan inti (core density)	1050-1400 kg/m³ combined laminate
Konduktivitas Termal (Thermal Conductivity)	0.20-0.45 W/(m·K), laminate construction dependent
Permukaan selesai	Smooth opaque silver dissipative exterior
Jenis Bersama	Three heat-sealed sides with open top for vacuum heat sealing
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Metalized or high-barrier aluminum-foil laminate90-180 micron gaugeFlat, gusseted or zipper formatOpen top or presealed configurationCustom dimensions and seal widthsCleanroom double-bagged packaging

Planning a Cleanroom Shielding Bag specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami