Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraumbekleidung, PPE und Verbrauchsmaterialien
Cleanroom Shielding Tasche
Silver metalized cleanroom shielding bag with dissipative polymer surfaces and a heat-sealable multilayer barrier for sensitive electronic components.
- Metalized multilayer laminate for electrostatic discharge shielding
- Dissipative inner and outer surfaces support controlled handling
- Heat-sealable silver barrier pouch for sensitive electronics
Produkteinführung
The Cleanroom Shielding Bag combines a durable polyester outer layer, a thin aluminum shielding layer and a heat-sealable dissipative polyethylene inner layer. The metalized construction reduces electric-field penetration while the polymer surfaces permit controlled charge dissipation. Its opaque silver barrier also limits moisture and light exposure during dry-pack storage.
Key Features
Dissipative surfaces reduce uncontrolled charge concentration
Polyester outer face improves puncture and scuff resistance
Polyethylene inner face supports airtight heat sealing
Clean conversion and double packaging aid controlled-area transfer
Kunden Produktbedenken
Sensitive devices may be damaged by electrostatic discharge, moisture ingress or punctured packaging. Shielding depends on an intact conductive envelope and a complete seal around the packed component.
Pinholes or folds can interrupt the barrier and reduce protection.Inspect the pouch surface and avoid severe creasing before use.
Contaminated seal areas can form leak channels.Keep the seal zone flat and qualify the sealing cycle.
Sharp leads may puncture the laminate from inside.Use lead protection or rigid trays for pointed components.
An ungrounded operator can introduce charge during packing.Handle the bag within the approved grounded ESD-control process.
Typische Anwendungen
For dry packing and protected transfer of PCBs, integrated circuits, sensors, semiconductor modules, precision electronic assemblies and moisture-sensitive devices.
Technische Parameter
These conservative ranges describe a metalized dissipative cleanroom pouch. Final thickness, barrier grade, dimensions and seal settings should match the device sensitivity and storage interval.
| Core Material | Dissipative polyester, aluminum shielding layer and heat-sealable dissipative polyethylene |
|---|---|
| Panel Dicke | 0.09-0.18 mm laminate thickness |
| Effektive Breite | 100-900 mm bag width |
| Maximale Länge | 1200 mm bag length |
| Stahl facing Dicke | 0 mm; aluminum metalization is used instead of steel |
| Kerndichte | 1050-1400 kg/m³ combined laminate |
| Thermische Leitfähigkeit | 0.20-0.45 W/(m·K), laminate construction dependent |
| Oberfläche Finish | Smooth opaque silver dissipative exterior |
| Gemeinsamer Typ | Three heat-sealed sides with open top for vacuum heat sealing |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Metalized or high-barrier aluminum-foil laminate90-180 micron gaugeFlat, gusseted or zipper formatOpen top or presealed configurationCustom dimensions and seal widthsCleanroom double-bagged packaging
Planning a Cleanroom Shielding Bag specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
