Silver cleanroom shielding bag in complete three-quarter view

클린룸 의류, PPE 및 소모품

클린룸 보호 가방

Silver metalized cleanroom shielding bag with dissipative polymer surfaces and a heat-sealable multilayer barrier for sensitive electronic components.

Metalized multilayer laminate for electrostatic discharge shielding
Dissipative inner and outer surfaces support controlled handling
Heat-sealable silver barrier pouch for sensitive electronics

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Shielding Bag combines a durable polyester outer layer, a thin aluminum shielding layer and a heat-sealable dissipative polyethylene inner layer. The metalized construction reduces electric-field penetration while the polymer surfaces permit controlled charge dissipation. Its opaque silver barrier also limits moisture and light exposure during dry-pack storage.

주요 기능

Continuous metal layer creates a protective shielding envelope

Dissipative surfaces reduce uncontrolled charge concentration

Polyester outer face improves puncture and scuff resistance

Polyethylene inner face supports airtight heat sealing

Clean conversion and double packaging aid controlled-area transfer

고객 제품 관심사

Sensitive devices may be damaged by electrostatic discharge, moisture ingress or punctured packaging. Shielding depends on an intact conductive envelope and a complete seal around the packed component.

Pinholes or folds can interrupt the barrier and reduce protection.Inspect the pouch surface and avoid severe creasing before use.

Contaminated seal areas can form leak channels.Keep the seal zone flat and qualify the sealing cycle.

Sharp leads may puncture the laminate from inside.Use lead protection or rigid trays for pointed components.

An ungrounded operator can introduce charge during packing.Handle the bag within the approved grounded ESD-control process.

일반적인 응용 프로그램

For dry packing and protected transfer of PCBs, integrated circuits, sensors, semiconductor modules, precision electronic assemblies and moisture-sensitive devices.

기술 매개변수

These conservative ranges describe a metalized dissipative cleanroom pouch. Final thickness, barrier grade, dimensions and seal settings should match the device sensitivity and storage interval.

핵심 재료	Dissipative polyester, aluminum shielding layer and heat-sealable dissipative polyethylene
패널 두께	0.09-0.18 mm laminate thickness
유효 폭	100-900 mm bag width
최대 길이	1200 mm bag length
강철 면면 두께	0 mm; aluminum metalization is used instead of steel
코어 밀도	1050-1400 kg/m³ combined laminate
열전도도 (Thermal Conductivity)	0.20-0.45 W/(m·K), laminate construction dependent
표면 마무리	Smooth opaque silver dissipative exterior
접합 유형	Three heat-sealed sides with open top for vacuum heat sealing
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Metalized or high-barrier aluminum-foil laminate90-180 micron gaugeFlat, gusseted or zipper formatOpen top or presealed configurationCustom dimensions and seal widthsCleanroom double-bagged packaging

Planning a Cleanroom Shielding Bag specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.