Silver cleanroom shielding bag in complete three-quarter view

Pakaian Bilik Bersih, PPE dan Barangan boleh guna

Beg Perisai Bilik Bersih

Silver metalized cleanroom shielding bag with dissipative polymer surfaces and a heat-sealable multilayer barrier for sensitive electronic components.

Metalized multilayer laminate for electrostatic discharge shielding
Dissipative inner and outer surfaces support controlled handling
Heat-sealable silver barrier pouch for sensitive electronics

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Cleanroom Shielding Bag combines a durable polyester outer layer, a thin aluminum shielding layer and a heat-sealable dissipative polyethylene inner layer. The metalized construction reduces electric-field penetration while the polymer surfaces permit controlled charge dissipation. Its opaque silver barrier also limits moisture and light exposure during dry-pack storage.

Ciri-ciri Utama

Continuous metal layer creates a protective shielding envelope

Dissipative surfaces reduce uncontrolled charge concentration

Polyester outer face improves puncture and scuff resistance

Polyethylene inner face supports airtight heat sealing

Clean conversion and double packaging aid controlled-area transfer

Kebimbangan Produk Pelanggan

Sensitive devices may be damaged by electrostatic discharge, moisture ingress or punctured packaging. Shielding depends on an intact conductive envelope and a complete seal around the packed component.

Pinholes or folds can interrupt the barrier and reduce protection.Inspect the pouch surface and avoid severe creasing before use.

Contaminated seal areas can form leak channels.Keep the seal zone flat and qualify the sealing cycle.

Sharp leads may puncture the laminate from inside.Use lead protection or rigid trays for pointed components.

An ungrounded operator can introduce charge during packing.Handle the bag within the approved grounded ESD-control process.

Permohonan yang biasa

For dry packing and protected transfer of PCBs, integrated circuits, sensors, semiconductor modules, precision electronic assemblies and moisture-sensitive devices.

Parameter teknikal

These conservative ranges describe a metalized dissipative cleanroom pouch. Final thickness, barrier grade, dimensions and seal settings should match the device sensitivity and storage interval.

Bahan Teras	Dissipative polyester, aluminum shielding layer and heat-sealable dissipative polyethylene
Ketebalan Panel	0.09-0.18 mm laminate thickness
Lebar berkesan	100-900 mm bag width
Panjang maksimum	1200 mm bag length
Keluli Menghadapi Ketebalan	0 mm; aluminum metalization is used instead of steel
Ketumpatan teras	1050-1400 kg/m³ combined laminate
Kekonduksian Terma	0.20-0.45 W/(m·K), laminate construction dependent
Kemasan permukaan	Smooth opaque silver dissipative exterior
Jenis Bersatu	Three heat-sealed sides with open top for vacuum heat sealing
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Metalized or high-barrier aluminum-foil laminate90-180 micron gaugeFlat, gusseted or zipper formatOpen top or presealed configurationCustom dimensions and seal widthsCleanroom double-bagged packaging

Planning a Cleanroom Shielding Bag specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami