Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Filter udara dan filtrasi kimia
Karbon Aktif Pleated Pre-Filter
A compact combination panel that captures coarse particles and adsorbs low concentrations of common odors and gaseous contaminants in one stage.
- Particle and Gas Filtration
- Activated Carbon Media
- Retrofit Panel Footprint
- Broad-Spectrum Odor Control
Perkenalan produk
The activated carbon pleated pre-filter combines a synthetic particulate layer with finely distributed activated carbon in a supported pleated pack. The particulate fibers protect the adsorbent from premature dust blockage, while the carbon surface captures low concentrations of odor molecules and common indoor or outdoor gaseous pollutants. Pleating increases contact area within standard 50 or 100 mm filter tracks. The filter is intended for comfort and light molecular-control duty, not for concentrated process gas capture or bulk chemical storage protection.
Fitur utama:
The upstream synthetic layer limits dust fouling of the activated-carbon surface.
A standard panel footprint allows odor-control upgrades without a separate deep carbon bed.
Distributed adsorbent shortens diffusion distance and responds quickly to fluctuating low gas concentrations.
Kekhawatiran produk pelanggan
A thin carbon panel has finite adsorbent mass, so its contaminant load and humidity exposure must remain within light-duty molecular-control conditions.
Outdoor traffic odors enter through a filter stage designed only for particles.Activated carbon distributed through the pleated medium adsorbs many low-level organic odor compounds.
Dust coats loose carbon and consumes pressure drop before the adsorbent is used.An integrated particulate layer captures coarse material before it reaches the carbon-bearing layer.
A deep granular carbon module will not fit the existing air-handler track.The combined media is formed into standard 44 or 95 mm panel depths for straightforward retrofitting.
Stored carbon filters lose capacity by adsorbing warehouse humidity and background vapors.Sealed packaging is kept closed until installation and stock is rotated within the recommended shelf period.
Aplikasi yang Tipis
Office and public-building outside airHospitals and care-area odor reductionRetail and hospitality ventilationTemporary construction odor controlPrefiltration ahead of deeper molecular filters
Parameter teknis
Typical construction ranges for a light-duty activated-carbon pleated pre-filter are shown below.
| Bahan inti | Synthetic particulate media combined with broad-spectrum activated-carbon adsorbent |
|---|---|
| Ketebalan Panel (Panel Thickness) | 44 or 95 mm actual depth |
| Efektif lebar | 289-594 mm standard face width |
| Panjang maksimum | Up to 594 mm standard face length |
| Baja menghadap ketebalan | 0.30-0.50 mm corrosion-resistant support grid where specified |
| Kepadatan inti (core density) | Approximately 120-250 kg/m³ nominal carbon-loaded media bulk density |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 0.045-0.080 W/(m·K) for the dry carbon-synthetic media pack |
| Permukaan selesai | Black or dark gray carbon-loaded pleats in a moisture-resistant frame |
| Jenis Bersama | Combination media pleated over a support grid and perimeter-bonded into a panel frame |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
44 mm or 95 mm depthGeneral-purpose or target-impregnated carbonBoard, plastic or galvanized frameFull- and half-module face sizes
Planning a Activated Carbon Pleated Pre-Filter specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
