Three-quarter view of a black activated carbon pleated pre-filter

エアフィルターと化学ろ過

活性炭はプリフィルターで折り畳まれました

A compact combination panel that captures coarse particles and adsorbs low concentrations of common odors and gaseous contaminants in one stage.

Particle and Gas Filtration
Activated Carbon Media
Retrofit Panel Footprint
Broad-Spectrum Odor Control

見積もりリクエスト製品案内

商品紹介

The activated carbon pleated pre-filter combines a synthetic particulate layer with finely distributed activated carbon in a supported pleated pack. The particulate fibers protect the adsorbent from premature dust blockage, while the carbon surface captures low concentrations of odor molecules and common indoor or outdoor gaseous pollutants. Pleating increases contact area within standard 50 or 100 mm filter tracks. The filter is intended for comfort and light molecular-control duty, not for concentrated process gas capture or bulk chemical storage protection.

主要な特徴

One pleated pack provides coarse-particle removal and low-level molecular adsorption.

The upstream synthetic layer limits dust fouling of the activated-carbon surface.

A standard panel footprint allows odor-control upgrades without a separate deep carbon bed.

Distributed adsorbent shortens diffusion distance and responds quickly to fluctuating low gas concentrations.

お客様の製品に関する懸念事項

A thin carbon panel has finite adsorbent mass, so its contaminant load and humidity exposure must remain within light-duty molecular-control conditions.

Outdoor traffic odors enter through a filter stage designed only for particles.Activated carbon distributed through the pleated medium adsorbs many low-level organic odor compounds.

Dust coats loose carbon and consumes pressure drop before the adsorbent is used.An integrated particulate layer captures coarse material before it reaches the carbon-bearing layer.

A deep granular carbon module will not fit the existing air-handler track.The combined media is formed into standard 44 or 95 mm panel depths for straightforward retrofitting.

Stored carbon filters lose capacity by adsorbing warehouse humidity and background vapors.Sealed packaging is kept closed until installation and stock is rotated within the recommended shelf period.

典型的な用途

Office and public-building outside airHospitals and care-area odor reductionRetail and hospitality ventilationTemporary construction odor controlPrefiltration ahead of deeper molecular filters

技術的なパラメータ

Typical construction ranges for a light-duty activated-carbon pleated pre-filter are shown below.

コア材料	Synthetic particulate media combined with broad-spectrum activated-carbon adsorbent
パネルの厚さ	44 or 95 mm actual depth
有効幅	289-594 mm standard face width
最大長さ	Up to 594 mm standard face length
鋼鉄の厚さを直面する	0.30-0.50 mm corrosion-resistant support grid where specified
コア密度	Approximately 120-250 kg/m³ nominal carbon-loaded media bulk density
熱伝導率	Approximately 0.045-0.080 W/(m·K) for the dry carbon-synthetic media pack
表面仕上げ	Black or dark gray carbon-loaded pleats in a moisture-resistant frame
ジョイントタイプ	Combination media pleated over a support grid and perimeter-bonded into a panel frame
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

44 mm or 95 mm depthGeneral-purpose or target-impregnated carbonBoard, plastic or galvanized frameFull- and half-module face sizes

Planning a Activated Carbon Pleated Pre-Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する