Three-quarter view of a black activated carbon pleated pre-filter

Penapis udara dan penapisan kimia

Karbon diaktifkan dilipat pra-penapis

A compact combination panel that captures coarse particles and adsorbs low concentrations of common odors and gaseous contaminants in one stage.

Particle and Gas Filtration
Activated Carbon Media
Retrofit Panel Footprint
Broad-Spectrum Odor Control

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The activated carbon pleated pre-filter combines a synthetic particulate layer with finely distributed activated carbon in a supported pleated pack. The particulate fibers protect the adsorbent from premature dust blockage, while the carbon surface captures low concentrations of odor molecules and common indoor or outdoor gaseous pollutants. Pleating increases contact area within standard 50 or 100 mm filter tracks. The filter is intended for comfort and light molecular-control duty, not for concentrated process gas capture or bulk chemical storage protection.

Ciri-ciri Utama

One pleated pack provides coarse-particle removal and low-level molecular adsorption.

The upstream synthetic layer limits dust fouling of the activated-carbon surface.

A standard panel footprint allows odor-control upgrades without a separate deep carbon bed.

Distributed adsorbent shortens diffusion distance and responds quickly to fluctuating low gas concentrations.

Kebimbangan Produk Pelanggan

A thin carbon panel has finite adsorbent mass, so its contaminant load and humidity exposure must remain within light-duty molecular-control conditions.

Outdoor traffic odors enter through a filter stage designed only for particles.Activated carbon distributed through the pleated medium adsorbs many low-level organic odor compounds.

Dust coats loose carbon and consumes pressure drop before the adsorbent is used.An integrated particulate layer captures coarse material before it reaches the carbon-bearing layer.

A deep granular carbon module will not fit the existing air-handler track.The combined media is formed into standard 44 or 95 mm panel depths for straightforward retrofitting.

Stored carbon filters lose capacity by adsorbing warehouse humidity and background vapors.Sealed packaging is kept closed until installation and stock is rotated within the recommended shelf period.

Permohonan yang biasa

Office and public-building outside airHospitals and care-area odor reductionRetail and hospitality ventilationTemporary construction odor controlPrefiltration ahead of deeper molecular filters

Parameter teknikal

Typical construction ranges for a light-duty activated-carbon pleated pre-filter are shown below.

Bahan Teras	Synthetic particulate media combined with broad-spectrum activated-carbon adsorbent
Ketebalan Panel	44 or 95 mm actual depth
Lebar berkesan	289-594 mm standard face width
Panjang maksimum	Up to 594 mm standard face length
Keluli Menghadapi Ketebalan	0.30-0.50 mm corrosion-resistant support grid where specified
Ketumpatan teras	Approximately 120-250 kg/m³ nominal carbon-loaded media bulk density
Kekonduksian Terma	Approximately 0.045-0.080 W/(m·K) for the dry carbon-synthetic media pack
Kemasan permukaan	Black or dark gray carbon-loaded pleats in a moisture-resistant frame
Jenis Bersatu	Combination media pleated over a support grid and perimeter-bonded into a panel frame
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

44 mm or 95 mm depthGeneral-purpose or target-impregnated carbonBoard, plastic or galvanized frameFull- and half-module face sizes

Planning a Activated Carbon Pleated Pre-Filter specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami