Three-quarter view of a black activated carbon pleated pre-filter

공기 필터 및 화학 여과

활성탄 Pleated Pre - Filter

A compact combination panel that captures coarse particles and adsorbs low concentrations of common odors and gaseous contaminants in one stage.

Particle and Gas Filtration
Activated Carbon Media
Retrofit Panel Footprint
Broad-Spectrum Odor Control

견적 요청 제품 찾아보기

상품 소개

The activated carbon pleated pre-filter combines a synthetic particulate layer with finely distributed activated carbon in a supported pleated pack. The particulate fibers protect the adsorbent from premature dust blockage, while the carbon surface captures low concentrations of odor molecules and common indoor or outdoor gaseous pollutants. Pleating increases contact area within standard 50 or 100 mm filter tracks. The filter is intended for comfort and light molecular-control duty, not for concentrated process gas capture or bulk chemical storage protection.

주요 기능

One pleated pack provides coarse-particle removal and low-level molecular adsorption.

The upstream synthetic layer limits dust fouling of the activated-carbon surface.

A standard panel footprint allows odor-control upgrades without a separate deep carbon bed.

Distributed adsorbent shortens diffusion distance and responds quickly to fluctuating low gas concentrations.

고객 제품 관심사

A thin carbon panel has finite adsorbent mass, so its contaminant load and humidity exposure must remain within light-duty molecular-control conditions.

Outdoor traffic odors enter through a filter stage designed only for particles.Activated carbon distributed through the pleated medium adsorbs many low-level organic odor compounds.

Dust coats loose carbon and consumes pressure drop before the adsorbent is used.An integrated particulate layer captures coarse material before it reaches the carbon-bearing layer.

A deep granular carbon module will not fit the existing air-handler track.The combined media is formed into standard 44 or 95 mm panel depths for straightforward retrofitting.

Stored carbon filters lose capacity by adsorbing warehouse humidity and background vapors.Sealed packaging is kept closed until installation and stock is rotated within the recommended shelf period.

일반적인 응용 프로그램

Office and public-building outside airHospitals and care-area odor reductionRetail and hospitality ventilationTemporary construction odor controlPrefiltration ahead of deeper molecular filters

기술 매개변수

Typical construction ranges for a light-duty activated-carbon pleated pre-filter are shown below.

핵심 재료	Synthetic particulate media combined with broad-spectrum activated-carbon adsorbent
패널 두께	44 or 95 mm actual depth
유효 폭	289-594 mm standard face width
최대 길이	Up to 594 mm standard face length
강철 면면 두께	0.30-0.50 mm corrosion-resistant support grid where specified
코어 밀도	Approximately 120-250 kg/m³ nominal carbon-loaded media bulk density
열전도도 (Thermal Conductivity)	Approximately 0.045-0.080 W/(m·K) for the dry carbon-synthetic media pack
표면 마무리	Black or dark gray carbon-loaded pleats in a moisture-resistant frame
접합 유형	Combination media pleated over a support grid and perimeter-bonded into a panel frame
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

44 mm or 95 mm depthGeneral-purpose or target-impregnated carbonBoard, plastic or galvanized frameFull- and half-module face sizes

Planning a Activated Carbon Pleated Pre-Filter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.