English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
صفر غرفة نظيفة ضوء
A sealed narrow-spectrum amber LED luminaire that limits short-wavelength exposure in photolithography, photosensitive compounding and controlled manufacturing areas.
- Narrow-Spectrum Amber Output
- Sealed Smooth Lens
- Recessed Cleanroom Mounting
- Top-Service Electronics
مقدمة المنتج
The amber cleanroom LED luminaire integrates a narrow-spectrum LED array into a welded recessed housing with a smooth sealed lens and overlapping stainless doorframe. Its amber output helps protect light-sensitive processes from UV and short-wavelength visible energy, while the wipeable exterior and continuous gasket maintain a clean ceiling interface. Grid and flange configurations support common cleanroom ceiling systems, with optional above-ceiling access for driver maintenance.
الخصائص الرئيسية
Smooth sealed lens and one-piece doorframe minimize dirt traps and simplify wipe-down.
Continuous closed-cell gasket limits leakage around the fixture and ceiling interface.
Top-access driver compartment permits service without opening the cleanroom-side lens.
مخاوف المنتج للعملاء
Ordinary white lighting can expose photosensitive materials to ultraviolet and short-wavelength visible energy while ceiling penetrations complicate cleanroom sealing.
Blue and UV energy can alter photoresists or sensitive ingredients.A narrow-spectrum amber LED array limits output in the damaging short-wavelength region.
Complex lens frames accumulate residue during cleaning.A smooth overlapping doorframe and sealed lens provide a wipeable cleanroom-side surface.
Driver service may interrupt controlled-room operation.Optional top access allows electrical maintenance from above the ceiling.
Fixture gaps can permit air leakage across pressure boundaries.Continuous closed-cell gaskets seal the lens frame and ceiling interface.
تطبيقات نموذجية
Semiconductor photolithography roomsPhotosensitive pharmaceutical compoundingNanotechnology research cleanroomsLight-sensitive coating and assembly areas
المعلمات الفنية
Typical construction values for a recessed amber cleanroom LED luminaire are listed below.
| المواد الأساسية | Welded steel housing with amber LED array, sealed optical lens and closed-cell gasket |
|---|---|
| سمك اللوحة | 70-140 mm recessed housing depth |
| العرض الفعال | 300-600 mm fixture width |
| الحد الأقصى الطول | Up to 1200 mm fixture length |
| الصلب يواجه سمك | 0.9-1.2 mm steel housing and stainless doorframe |
| الكثافة الأساسية | 1200-1400 kg/m³ for optical polymer lens material |
| الموصلية الحرارية | 0.19-0.24 W/(m·K) for optical polymer lens |
| إنهاء السطح | White powder-coated housing with brushed stainless doorframe and smooth amber lens |
| نوع المشترك | Welded recessed enclosure with continuous gasket, captive fasteners and grid or flanged ceiling interface |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
570 nm phosphor-converted or 590 nm native amber LEDs1 x 4, 2 x 2 and 2 x 4 formatsGrid or flange ceiling mountingTop-access or room-side service configuration
Planning a Yellow Cleanroom Light specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
