English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
مسحات أخذ العينات المعقمة
Individually pouched sterile sampling swabs with a low-lint polyester head, polypropylene break-point handle and contamination-controlled peel packaging.
- Individually sealed peel pouch protects each sampling swab until use
- Low-background polyester head supports controlled surface recovery
- Defined break-point handle aids transfer into compatible sample vessels
مقدمة المنتج
Sterile Sampling Swabs are designed for controlled recovery from equipment, work surfaces and hard-to-access monitoring points. A knitted polyester head provides predictable wetting and low fiber contribution, while the rigid polypropylene handle incorporates a defined break-point for transfer where the sampling method requires it. Each swab is sealed in a peel pouch to maintain protection through storage and clean-area introduction.
الخصائص الرئيسية
Polyester head offers low lint and consistent surface contact
Blue break-point ring makes the separation location easy to identify
Rigid polypropylene handle supports repeatable pressure and reach
Dry or validated-buffer-compatible configurations can be supplied
مخاوف المنتج للعملاء
Environmental and cleaning-validation samples are vulnerable to background contamination and inconsistent recovery. Packaging, head material and handle geometry must fit both the sampled feature and the laboratory workflow.
An unprotected swab can acquire contamination before sampling.Use an individually sealed sterile peel pouch opened at the point of use.
Head materials may contribute fibers or interfere with analysis.Select a low-lint polyester head compatible with the analytical method.
Poorly defined handle breaking can complicate vial transfer.Specify a visible controlled break-point matched to the collection vessel.
The selected head may not recover residue consistently from the target surface.Qualify swab material, wetting solution, area and technique together.
تطبيقات نموذجية
Applied in cleaning validation, environmental monitoring, equipment hygiene checks, surface residue recovery and controlled sampling in pharmaceutical, biotechnology, food-processing, medical-device and electronics facilities.
المعلمات الفنية
The following ranges describe common individually pouched polyester sampling swabs. Final head design, break-point position, sterility format and sampling solution are selected for the validated method and vessel geometry.
| المواد الأساسية | Knitted polyester sampling head with breakaway polypropylene handle |
|---|---|
| سمك اللوحة | 3–7 mm |
| العرض الفعال | 5–16 mm |
| الحد الأقصى الطول | 160 mm |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 65–110 kg/m³ apparent head density |
| الموصلية الحرارية | 0.04–0.10 W/(m·K), assembly dependent |
| إنهاء السطح | White low-lint head in a clear sterile peel pouch |
| نوع المشترك | Thermally bonded head and defined handle break-point |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Several polyester head sizesAlternative handle lengthsCustom break-point locationDry or compatible pre-moistened formatIndividual peel pouch or kit packagingSterile and non-sterile configurations
Planning a Sterile Sampling Swabs specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
