Three-quarter view of one sterile sampling swab in a clear peel pouch

クリーンルーム衣料品、 PPE 、消耗品

無菌サンプリングスワイプ

Individually pouched sterile sampling swabs with a low-lint polyester head, polypropylene break-point handle and contamination-controlled peel packaging.

Individually sealed peel pouch protects each sampling swab until use
Low-background polyester head supports controlled surface recovery
Defined break-point handle aids transfer into compatible sample vessels

見積もりリクエスト製品案内

商品紹介

Sterile Sampling Swabs are designed for controlled recovery from equipment, work surfaces and hard-to-access monitoring points. A knitted polyester head provides predictable wetting and low fiber contribution, while the rigid polypropylene handle incorporates a defined break-point for transfer where the sampling method requires it. Each swab is sealed in a peel pouch to maintain protection through storage and clean-area introduction.

主要な特徴

Individual peel pouch limits handling before the sampling event

Polyester head offers low lint and consistent surface contact

Blue break-point ring makes the separation location easy to identify

Rigid polypropylene handle supports repeatable pressure and reach

Dry or validated-buffer-compatible configurations can be supplied

お客様の製品に関する懸念事項

Environmental and cleaning-validation samples are vulnerable to background contamination and inconsistent recovery. Packaging, head material and handle geometry must fit both the sampled feature and the laboratory workflow.

An unprotected swab can acquire contamination before sampling.Use an individually sealed sterile peel pouch opened at the point of use.

Head materials may contribute fibers or interfere with analysis.Select a low-lint polyester head compatible with the analytical method.

Poorly defined handle breaking can complicate vial transfer.Specify a visible controlled break-point matched to the collection vessel.

The selected head may not recover residue consistently from the target surface.Qualify swab material, wetting solution, area and technique together.

典型的な用途

Applied in cleaning validation, environmental monitoring, equipment hygiene checks, surface residue recovery and controlled sampling in pharmaceutical, biotechnology, food-processing, medical-device and electronics facilities.

技術的なパラメータ

The following ranges describe common individually pouched polyester sampling swabs. Final head design, break-point position, sterility format and sampling solution are selected for the validated method and vessel geometry.

コア材料	Knitted polyester sampling head with breakaway polypropylene handle
パネルの厚さ	3–7 mm
有効幅	5–16 mm
最大長さ	160 mm
鋼鉄の厚さを直面する	0 mm; no steel facing used
コア密度	65–110 kg/m³ apparent head density
熱伝導率	0.04–0.10 W/(m·K), assembly dependent
表面仕上げ	White low-lint head in a clear sterile peel pouch
ジョイントタイプ	Thermally bonded head and defined handle break-point
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Several polyester head sizesAlternative handle lengthsCustom break-point locationDry or compatible pre-moistened formatIndividual peel pouch or kit packagingSterile and non-sterile configurations

Planning a Sterile Sampling Swabs specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する