English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
Step-over مقعد
A narrow solid-top Type 304 stainless bench that forms a visible step-over boundary between footwear-change zones while providing a stable surface for the swing-over gowning movement.
- Defined clean-to-dirty boundary
- Solid crevice-minimized top
- Narrow 400 mm profile
- Adjustable stainless bullet feet
مقدمة المنتج
The step-over bench is positioned across a personnel change route to create a deliberate physical boundary between the street-shoe side and the clean-footwear side. Its 400 mm-deep solid Type 304 stainless top provides a stable surface for the seated swing-over movement while remaining narrow enough to discourage walking along the bench. Fully welded end frames, capped tube ends and a continuous folded seat minimize crevices. Adjustable bullet feet stabilize the freestanding unit and permit its removal when the gowning-room floor requires unrestricted cleaning.
الخصائص الرئيسية
The solid formed top supports the seated swing-over movement without perforations catching disposable shoe-cover material.
Open space beneath the standard bench prevents personal footwear storage from being confused with the clean-side boundary.
A freestanding welded frame can be relocated for deep floor cleaning while bullet feet provide stable everyday placement.
مخاوف المنتج للعملاء
A controlled footwear change requires a physical boundary that guides the operator's movement without becoming a storage bench or a permanent floor-cleaning obstruction.
Personnel cross an unmarked floor line without completing the intended footwear sequence.The continuous 1200 mm bench forms a visible barrier that must be crossed deliberately.
Perforated seating catches thin shoe covers during the swing-over movement.A smooth solid top provides uninterrupted support beneath the operator.
Integrated cubbies encourage street footwear to migrate beneath the clean-side boundary.The standard open-base design keeps storage separate and leaves the zone beneath fully visible.
Fixed floor barriers complicate periodic edge-to-edge floor cleaning.The freestanding frame can be moved after the adjustable bullet feet are released from load.
تطبيقات نموذجية
Pharmaceutical clean-to-dirty gowning boundariesBiotechnology personnel airlocksAseptic packaging change roomsMedical-device controlled entrancesHigh-care food production transitions
المعلمات الفنية
Typical configurable specifications for a freestanding stainless cleanroom step-over bench are listed below.
| المواد الأساسية | Type 304 stainless solid formed seat on a fully welded tubular open-base frame with four adjustable bullet feet |
|---|---|
| سمك اللوحة | 1.5 mm solid formed stainless seat panel |
| العرض الفعال | 1200 mm standard boundary length |
| الحد الأقصى الطول | 450 mm maximum overall bench height |
| الصلب يواجه سمك | 1.5 mm Type 304 stainless seat and tubular frame walls |
| الكثافة الأساسية | 7900-8000 كجم / م3 لنوع 304 الفولاذ المقاوم للصدأ |
| الموصلية الحرارية | 14-17 W / (m · K) لنوع 304 الفولاذ المقاوم للصدأ |
| إنهاء السطح | Uniform satin-brushed Type 304 solid seat and welded frame with smooth ground corners |
| نوع المشترك | Continuous folded seat welded to open tubular end frames with capped rails and threaded bullet feet |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
1500 or 1800 mm boundary lengthsOne- or two-sided shoe storagePerforated seat surfaceFloor-mount foot plates
Planning a Step-Over Bench specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
